Numerical simulation of flow and heat transfer of <i>n</i>-decane in sub-millimeter spiral tube at supercritical pressure

Jiahao Xing; Huaizhi Han; Ruitian Yu; Wen Luo

Your Location：

Home >

Browse articles >

Numerical simulation of flow and heat transfer of n-decane in sub-millimeter spiral tube at supercritical pressure

Full Length Article | Updated：2026-01-06

- Numerical simulation of flow and heat transfer of n-decane in sub-millimeter spiral tube at supercritical pressure
- Numerical simulation of flow and heat transfer of n-decane in sub-millimeter spiral tube at supercritical pressure
- 中国化学工程学报（英文版） 2023年60卷第8期页码：173-185
- Affiliations：
  
  1. School of Chemical Engineering, Sichuan University,Chengdu,China,610065
  2. Engineering Research Center of Combustion and Cooling for Aerospace Power, Ministry of Education, Sichuan University,Chengdu,China,610065
- Author bio：
- Funds：
- DOI：
  中图分类号：
- 纸质出版：2023
- Accepted：
Scan QR Code
Jiahao Xing, Huaizhi Han, Ruitian Yu, 等. Numerical simulation of flow and heat transfer of n-decane in sub-millimeter spiral tube at supercritical pressure[J]. 中国化学工程学报（英文版）, 2023,60(8):173-185.

-decane in sub-millimeter spiral tube at supercritical pressure[J]. 中国化学工程学报, 2023, 60(8): 173-185.
Jiahao Xing, Huaizhi Han, Ruitian Yu, 等. Numerical simulation of flow and heat transfer of n-decane in sub-millimeter spiral tube at supercritical pressure[J]. 中国化学工程学报（英文版）, 2023,60(8):173-185. DOI：

-decane in sub-millimeter spiral tube at supercritical pressure[J]. 中国化学工程学报, 2023, 60(8): 173-185. DOI：

摘要

Abstract

The flow and heat transfer characteristics of

-decane in the sub-millimeter spiral tube (SMST) at supercritical pressure (

= 3 MPa) are studied by the RNG

k -ε

numerical model in this paper. The effects of various Reynolds numbers (

) and structural parameters pitch (

) and spiral diameter (

) are analyzed. Results indicate that the average Nusselt number (

) and friction factor (

) increase with an increase in

and decrease with an increase in

(tube diameter). In terms of the structural parameter

it is found that as

increases

the

and

first increase

and then decrease. and the critical structural parameter is

= 4. Compared with the straight tube

the SMST can improve

by 34.8% at best

while it can improve

by 102.1% at most. In addition

a comprehensive heat transfer coefficient is applied to analyze the thermodynamic properties of SMST. With the optimal structural parameters of

= 6 and

= 4

the comprehensive heat transfer factor of supercritical pressure hydrocarbon fuel in the SMST

can reach 1.074. At last

correlations of the average Nusselt number and friction factor are developed to predict the flow and heat transfer of

-decane at supercritical pressure.

关键词

Keywords

references

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Optimization of chemical looping hydrogen generation process via Aspen Plus—Machine learning integration

Experimental study on hydrogen explosion venting and flame arresting under different metal copper foam structures

Numerical simulation of multicomponent hydrocarbon flow and heat transfer in a regenerative catalytic oxidizer

Numerical study on filtration characteristics of granular bed for high temperature coal pyrolysis gas

Hybrid modelling incorporating reaction and mechanistic data for accelerating the development of isooctanol oxidation

Numerical simulation of flow and heat transfer of n-decane in sub-millimeter spiral tube at supercritical pressure

Numerical simulation of flow and heat transfer of n-decane in sub-millimeter spiral tube at supercritical pressure

DOI：

摘要

Abstract

关键词

Keywords

references