Kinetic study for the oxidation of cyclohexanol and cyclohexanone with nitric acid to adipic acid

Detao Pan; Guangxiao Li; Yuanhai Su; Huilong Wei; Zhenghong Luo

Your Location：

Home >

Browse articles >

Kinetic study for the oxidation of cyclohexanol and cyclohexanone with nitric acid to adipic acid

Catalysis, Kinetics and Reaction Engineering | Updated：2026-01-06

- Kinetic study for the oxidation of cyclohexanol and cyclohexanone with nitric acid to adipic acid
- Kinetic study for the oxidation of cyclohexanol and cyclohexanone with nitric acid to adipic acid
- 中国化学工程学报（英文版） 2021年29卷第1期页码：183-189
- Affiliations：
  
  Department of Chemical Engineering, School of Chemistry and Chemical Engineering, State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University,Shanghai,China,200240
- Author bio：
- Funds：
- DOI：
  中图分类号：
- 纸质出版：2021
- Accepted：
Scan QR Code
Detao Pan, Guangxiao Li, Yuanhai Su, 等. Kinetic study for the oxidation of cyclohexanol and cyclohexanone with nitric acid to adipic acid[J]. 中国化学工程学报（英文版）, 2021,29(1):183-189.

Detao Pan, Guangxiao Li, Yuanhai Su, Huilong Wei, Zhenghong Luo. Kinetic study for the oxidation of cyclohexanol and cyclohexanone with nitric acid to adipic acid[J]. Chinese Journal of Chemical Engineering, 2021, 29(1): 183-189.
Detao Pan, Guangxiao Li, Yuanhai Su, 等. Kinetic study for the oxidation of cyclohexanol and cyclohexanone with nitric acid to adipic acid[J]. 中国化学工程学报（英文版）, 2021,29(1):183-189. DOI：

Detao Pan, Guangxiao Li, Yuanhai Su, Huilong Wei, Zhenghong Luo. Kinetic study for the oxidation of cyclohexanol and cyclohexanone with nitric acid to adipic acid[J]. Chinese Journal of Chemical Engineering, 2021, 29(1): 183-189. DOI：

摘要

Abstract

The adipic acid is an important intermediate in the production of nylon

polyurethane and polyester resins. The industrial approach for preparing adipic acid is through the liquid catalytic oxidation of KA oil with nitric acid. In this work

a comprehensive model is developed for this reaction based on the kinetic study conducted in a continuous flow tubular reactor. The kinetic model fits well with the experimental results across the experimental conditions

and the average relative error between the calculated and experimental values is 5.7%. Results show that there was an induction period at the early stage of reaction. Moreover

it is found that at temperature range of 328-358 K

the formation rate of adipic acid strongly dependents on the temperature and nitric acid concentration. The developed model is used to predict the yield of adipic acid at 359-368 K. The work in this study could provide much knowledge for industrial tubular reactor design.

关键词

Keywords

references

浏览量

408

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Mass transfer and kinetic behavior studies on cycloaddition of carbon dioxide with propylene oxide catalyzed by ionic liquid in microchannel reactor

The investigation of Gemini surfactant effects on CH4 and CO2 hydrates

A highly efficient La-modified ZnAl-LDO catalyst and its performance in the synthesis of dimethyl carbonate from methyl carbamate and methanol

Ionic liquid catalyzed solvent-free synthesis of chalcone and its derivatives under mild conditions

Leaching calcium from phosphogypsum desulfurization slag by using ammonium chloride solution: Thermodynamics and kinetics study