Kinetic degradation of amoxicillin by using the electro-Fenton process in the presence of a graphite rods from used batteries
Catalysis, Kinetics and Reaction Engineering|Updated:2026-01-06
|
Kinetic degradation of amoxicillin by using the electro-Fenton process in the presence of a graphite rods from used batteries
Kinetic degradation of amoxicillin by using the electro-Fenton process in the presence of a graphite rods from used batteries
中国化学工程学报(英文版)2021年32卷第4期 页码:183-190
Affiliations:
1. Laboratoire de Génie de l'Environnement(LGE), Faculté de Technologie, Université de Bejaia,Bejaia,Algeria,06000
2. Ecole Nationale Supérieure de Chimie de Rennes, Université Rennes1, CNRS, UMR 6226, 11 allée de Beaulieu,CS,France,50837
Author bio:
Funds:
DOI:
中图分类号:
纸质出版:2021
Accepted:
Scan QR Code
Hakima Kadji, Idris Yahiaoui, Zehira Garti, 等. Kinetic degradation of amoxicillin by using the electro-Fenton process in the presence of a graphite rods from used batteries[J]. 中国化学工程学报(英文版), 2021,32(4):183-190.
Hakima Kadji, Idris Yahiaoui, Zehira Garti, Abdeltif Amrane, Farida Aissani-Benissad. Kinetic degradation of amoxicillin by using the electro-Fenton process in the presence of a graphite rods from used batteries[J]. Chinese Journal of Chemical Engineering, 2021, 32(4): 183-190.
Hakima Kadji, Idris Yahiaoui, Zehira Garti, 等. Kinetic degradation of amoxicillin by using the electro-Fenton process in the presence of a graphite rods from used batteries[J]. 中国化学工程学报(英文版), 2021,32(4):183-190.DOI:
Hakima Kadji, Idris Yahiaoui, Zehira Garti, Abdeltif Amrane, Farida Aissani-Benissad. Kinetic degradation of amoxicillin by using the electro-Fenton process in the presence of a graphite rods from used batteries[J]. Chinese Journal of Chemical Engineering, 2021, 32(4): 183-190.DOI:
Kinetic degradation of amoxicillin by using the electro-Fenton process in the presence of a graphite rods from used batteries
This study reports the removal of amoxicillin (AMX) in aqueous media using the electro-Fenton process in the presence of a graphite cathode recovered from used batteries. The impact of the relevant parameters on the electro-Fenton process
namely the applied current intensity
the temperature
the initial concentration of AMX and the initial concentration of ferrous ions were investigated. The results showed that the optimal values were:
I
=600 mA
T
=25℃
[AMX
]
0
=0.082 mmol·L
-1
and[Fe
2+
]
=1 mmol·L
-1
leading to 95% degradation and 74% mineralization. The model parameters of AMX mineralization were determined using nonlinear methods
showing that it follows a pseudo-second-order kinetic. The Energy consumption (EC) calculated under the optimal values was found to be 0.79 kW·h·g
-1
which was of the same order of magnitude of those reported in other findings; while it is noteworthy that the electrodes used in our study are of a lower cost.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Flexibility analysis for continuous ibuprofen manufacturing processes
相关作者
Qi Yabing
Zhao Chumeng
Wenlong Xiang
Xian Zhang
Rou Xiao
Yanhui Zhang
Shunda lin
Yang Lu
相关机构
School of Chemistry and Chemical Engineering, Xi'an University of Architecture and Technology
Fujian Provincial University Key Laboratory of Pollution Monitoring and Control, Minnan Normal University
College of Chemistry, Chemical Engineering and Environment, Fujian Province Key Laboratory of Morden Analytical Science and Separation Technology, Minnan Normal University
Hangzhou Xiaoshan Jinjiang Green Energy Co., Ltd., Xiaoshan
Zhejiang University Qingshanhu Energy Research Center