Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner

Yang Liu; Yangbo Deng; Junrui Shi; Rujie Xiao; Houping Li

Your Location：

Home >

Browse articles >

Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner

Catalysis, Kinetics and Reaction Engineering | Updated：2026-01-06

- Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner
- Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner
- 中国化学工程学报（英文版） 2021年34卷第6期页码：87-96
- Affiliations：
  
  1. Marine Engineering College, Dalian Maritime University,Dalian,China,116026
  2. Naval Architecture and Ocean Engineering College, Dalian Maritime University,Dalian,China,116026
  3. School of Transportation and Vehicle Engineering, Shandong University of Technology,Zibo,China,255049
- Author bio：
- Funds：
- DOI：
  中图分类号：
- 纸质出版：2021
- Accepted：
Scan QR Code
Yang Liu, Yangbo Deng, Junrui Shi, 等. Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner[J]. 中国化学工程学报（英文版）, 2021,34(6):87-96.

Yang Liu, Yangbo Deng, Junrui Shi, Rujie Xiao, Houping Li. Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner[J]. Chinese Journal of Chemical Engineering, 2021, 34(6): 87-96.
Yang Liu, Yangbo Deng, Junrui Shi, 等. Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner[J]. 中国化学工程学报（英文版）, 2021,34(6):87-96. DOI：

Yang Liu, Yangbo Deng, Junrui Shi, Rujie Xiao, Houping Li. Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner[J]. Chinese Journal of Chemical Engineering, 2021, 34(6): 87-96. DOI：

摘要

Abstract

A simplified two-dimensional model of two-layer porous burner based on pore level is developed. The heat transfer of solid phase in porous burner is seen as the synergistic effects of conduction through connecting bridges and surface radiation between the solid particles in the model. A numerical simulation study on the characteristics of flow

combustion and heat transfer in the two-layer porous burner is carried out using the pore level model

and the effects of the control parameters such as the inlet velocity and solid thermal conductivity on thermal non-equilibrium are investigated. The results show that the flame structure is highly two-dimensional based on pore level. Obvious thermal non-equilibrium in the burner for the two phases and solid phase are observed

the largest temperature difference between the gas and solid phases is observed in combustion zone

while the temperature difference inside the solid particles is largest near the flame front. The results also reveal that thermal non-equilibrium of porous burner is much affected by the inlet velocity and solid thermal conductivity.

关键词

Keywords

references

浏览量

132

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Numerical investigation of grooves effects on the thermal performance of helically grooved shell and coil tube heat exchanger

Multi-fluid Eulerian simulation of binary particles mixing and gas-solids contacting in high solids-flux downer reactor equipped with a lateral particle feeding nozzle

A numerical study on heat transfer enhancement and design of a heat exchanger with porous media in continuous hydrothermal flow synthesis system

Comparison of heat transfer performances of helix baffled heat exchangers with different baffle configurations

Optimization of chemical looping hydrogen generation process via Aspen Plus—Machine learning integration