Integration of energy recovery network including recycling residual pressure energy with pinch technology

Jianqiang Deng; Zheng Cao; Dongbo Zhang; Xiao Feng

Your Location：

Home >

Browse articles >

Integration of energy recovery network including recycling residual pressure energy with pinch technology

Process Systems Engineering and Process Safety | Updated：2026-01-06

- Integration of energy recovery network including recycling residual pressure energy with pinch technology
- Integration of energy recovery network including recycling residual pressure energy with pinch technology
- 中国化学工程学报（英文版） 2017年25卷第4期页码：453-462
- Affiliations：
  
  1. School of Chemical Engineering and Technology, Xi'an Jiaotong University,Xi'an,China,710049
  2. Shaanxi Coal and Chemical Technology Institute Co., Ltd,Xi'an,710070
- Author bio：
- Funds：
- DOI：
  中图分类号：
- 纸质出版：2017
- Accepted：
Scan QR Code
Jianqiang Deng, Zheng Cao, Dongbo Zhang, 等. Integration of energy recovery network including recycling residual pressure energy with pinch technology[J]. 中国化学工程学报（英文版）, 2017,25(4):453-462.

Jianqiang Deng, Zheng Cao, Dongbo Zhang, Xiao Feng. Integration of energy recovery network including recycling residual pressure energy with pinch technology[J]. , 2017, 25(4): 453-462.
Jianqiang Deng, Zheng Cao, Dongbo Zhang, 等. Integration of energy recovery network including recycling residual pressure energy with pinch technology[J]. 中国化学工程学报（英文版）, 2017,25(4):453-462. DOI：

Jianqiang Deng, Zheng Cao, Dongbo Zhang, Xiao Feng. Integration of energy recovery network including recycling residual pressure energy with pinch technology[J]. , 2017, 25(4): 453-462. DOI：

摘要

Abstract

Work exchange is a promising innovative technology in recovering residual pressure energy.However

at the systematic level

the comprehensive utilization of different energy resources in an energy system has become an issue of concern.In this work

a systematic approach is proposed

one that successively integrates heat

work and adjusts operation parameters.A detailed procedure for building a heat-work coupling transfer network is provided.The synthesis mainly consists of constructing a work exchange sub-network with pinch analysis based on positive displacement type work exchangers.Simultaneously

another kind of sub-network based on turbine-type work exchangers is built as a schematic comparison.The influence of applying a positive displacement work exchanger on the system is investigated.Finally

as a case study

a renovation design of a typical rectisol process in the coal-water slurry gasification section of an ammonia plant is presented.The results show that the added work exchanger has little impact on the existing heat exchange sub-network.Moreover

extra pressure energy is recovered by coupling the transfer network.It is concluded that the heat-work systematic design is a promising and powerful method to use energy more efficiently.

关键词

Keywords

references

浏览量

105

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Integration of a Gas Fired Steam Power Plant with a Total Site Utility Using a New Cogeneration Targeting Procedure

A Two-step Design Method for Shaft Work Targeting on Low-temperature Process

Optimizing energy efficiency in fluid catalytic cracking units with GA and NSGA-II: A comprehensive simulation and multi-factor analysis

Optimization of chemical looping hydrogen generation process via Aspen Plus—Machine learning integration

Enhancing corrosion resistance of heat-assisted forming titanium bipolar plate for proton exchange membrane fuel cell through optimized heat treatment