Eulerian-Lagrangian simulation of bubble coalescence in bubbly flow using the spring-dashpot model

Jing Xue; Feiguo Chen; Ning Yang; Wei Ge

Your Location：

Home >

Browse articles >

Eulerian-Lagrangian simulation of bubble coalescence in bubbly flow using the spring-dashpot model

Fluid Dynamics and Transport Phenomena | Updated：2026-01-06

- Eulerian-Lagrangian simulation of bubble coalescence in bubbly flow using the spring-dashpot model
- Eulerian-Lagrangian simulation of bubble coalescence in bubbly flow using the spring-dashpot model
- 中国化学工程学报（英文版） 2017年25卷第3期页码：249-256
- Affiliations：
  
  1. State Key Laboratory of Multiphase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences, P. O. Box 353,Beijing,China,100190
  2. University of Chinese Academy of Sciences,Beijing,China,100049
- Author bio：
- Funds：
- DOI：
  中图分类号：
- 纸质出版：2017
- Accepted：
Scan QR Code
Jing Xue, Feiguo Chen, Ning Yang, 等. Eulerian-Lagrangian simulation of bubble coalescence in bubbly flow using the spring-dashpot model[J]. 中国化学工程学报（英文版）, 2017,25(3):249-256.

Jing Xue, Feiguo Chen, Ning Yang, Wei Ge. Eulerian-Lagrangian simulation of bubble coalescence in bubbly flow using the spring-dashpot model[J]. , 2017, 25(3): 249-256.
Jing Xue, Feiguo Chen, Ning Yang, 等. Eulerian-Lagrangian simulation of bubble coalescence in bubbly flow using the spring-dashpot model[J]. 中国化学工程学报（英文版）, 2017,25(3):249-256. DOI：

Jing Xue, Feiguo Chen, Ning Yang, Wei Ge. Eulerian-Lagrangian simulation of bubble coalescence in bubbly flow using the spring-dashpot model[J]. , 2017, 25(3): 249-256. DOI：

摘要

Abstract

The Eulerian-Lagrangian simulation of bubbly flow has the advantage of tracking the motion of bubbles in continuous fluid

and hence the position and velocity of each bubble could be accurately acquired. Previous simulation usually used the hard-sphere model for bubble-bubble interactions

assuming that bubbles are rigid spheres and the collisions between bubbles are instantaneous. The bubble contact time during collision processes is not directly taken into account in the collision model. However

the contact time is physically a prerequisite for bubbles to coalesce

and should be long enough for liquid film drainage. In thiswork we applied the spring-dashpot model to model the bubble collisions and the bubble contact time

and then integrated the spring-dashpot model with the film drainage model for coalescence and a bubble breakage model. The bubble contact time is therefore accurately recorded during the collisions. We investigated the performance of the spring-dashpot model and the effect of the normal stiffness coefficient on bubble coalescence in the simulation. The results indicate that the spring-dashpot model together with the bubble coalescence and breakage model could reasonably reproduce the two-phase flow field

bubble coalescence and bubble size distribution. The influence of normal stiffness coefficient on simulation is also discussed.

关键词

Keywords

references

浏览量

292

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Computational study of bubble coalescence/break-up behaviors and bubble size distribution in a 3-D pressurized bubbling gas-solid fluidized bed of Geldart A particles

Bubble dispersion intensification via flow guidance and drainage in a bubble column with internals

Comparative evaluation of interphase mass transfer models for co- and counter-current bubble columns using two-fluid CFD-PBM simulations

Effects of internals on macroscopic fluid dynamics in a bubble column

Visual experimental study of nanofluids application to promote CO2 absorption in a bubble column