a dual-throat supersonic separation device with porous wall has been proposed to solve the starting problem of supersonic separator
and the feasibility of the proposed device has been tested numerically and experimentally. Its flow characteristics have been investigated and the effect of some important parameters including nozzle pressure ratio (R
NP
)
inlet temperature and swirl intensity were examined. In the device
the supersonic flow state and strong centrifugal acceleration of 240000g can be obtained
which are necessary for the condensation and separation of water vapor. The supersonic region in the device enlarged and the shock wave shifted downstream along with the increasing R
NP
. The separation performance was improved with the increasing R
NP
and the inlet temperature. The best separation performance in this study was obtained with ΔT
d
=28 K.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Performance of Inner-core Supersonic Gas Separation Device with Droplet Enlargement Method
Synergistic Ba/Na promotion of BaFe2O4-derived catalysts for enhanced CO2 hydrogenation to light olefins
Enhanced mass transfer in flexible electrodes of open-pore cobalt disulfide nanosheets supported on sulfur-doped carbon fibers for efficient zinc-air batteries
Preparation of novel hierarchical porous Fe2O3/SBA-15 with microporous plugs from coal gasification fine residue and its degradation of phenol in coal chemical wastewater
CFD-PBM simulation of liquid-liquid dispersions in an industrial pulsed disc and doughnut column with directly measured breakup and coalescence kernels
相关作者
马庆芬
胡大鹏
贺高红
胡施俊
刘文伟
徐巧莲
王予新
相关机构
Department of Chemical Machinery, Dalian University of Technology
Department of Mechanical Engineering, Hainan University
Department of Chemical Engineering, Dalian University of Technology
China Liaohe Petroleum Engineering Co., Ltd. (LPE)
China Beijing Dwell Petroleum & Gas Technology Development Company Ltd.