Densities and Viscosities of 1-butyl-3-methylimidazolium Hexafluorophosphate [bmim][PF<sub>6</sub>]+CO<sub>2</sub> Binary System：Determination and Correlation

乔燕; 闫方友; 夏淑倩; 马沛生

Your Location：

Home >

Browse articles >

Densities and Viscosities of 1-butyl-3-methylimidazolium Hexafluorophosphate [bmim][PF₆]+CO₂ Binary System：Determination and Correlation

化工热力学 | Updated：2026-01-06

- Densities and Viscosities of 1-butyl-3-methylimidazolium Hexafluorophosphate [bmim][PF₆]+CO₂ Binary System：Determination and Correlation
- Densities and Viscosities of 1-butyl-3-methylimidazolium Hexafluorophosphate [bmim][PF₆]+CO₂ Binary System：Determination and Correlation
- 中国化学工程学报（英文版） 2013年21卷第11期页码：1284-12901004-954160622-9
- Affiliations：
  
  2 Key Laboratory for Green Chemical Technology of the State Education Ministry, School of Chemical Engineering and Technology, Tianjin University,Tianjin,China,300072
- Author bio：
- Funds：
- DOI：
  中图分类号：
- 纸质出版：2013
- Accepted：
Scan QR Code
乔燕, 闫方友, 夏淑倩, 等. Densities and Viscosities of 1-butyl-3-methylimidazolium Hexafluorophosphate [bmim][PF₆]+CO₂ Binary System：Determination and Correlation[J]. 中国化学工程学报（英文版）, 2013,21(11):1284-12901004-954160622-9.

]+CO
乔燕, 闫方友, 夏淑倩, 等. Densities and Viscosities of 1-butyl-3-methylimidazolium Hexafluorophosphate [bmim][PF₆]+CO₂ Binary System：Determination and Correlation[J]. 中国化学工程学报（英文版）, 2013,21(11):1284-12901004-954160622-9. DOI：

]+CO DOI：

摘要

Abstract

A gas-dissolving device was designed and connected to the falling-body viscometer

which was used to determine the viscosities of liquids in our lab before. The equipment can be used to determine the gas composition

the densities and viscosities of the solution at the same time. The densities and viscosities of [bmim

]

[PF

]

+ CO

binary system were determined in the temperature range of 313.2 to 413.2 K and pressure range of 5.0 to 25.0 MPa by the equipment. Then the viscosities of [bmim

]

[PF

]

+ CO

binary system at constant temperature

constant pressure

and different temperature and pressure were correlated

respectively. For the correlation at different temperature and different pressure for different concentration mixtures the average relative deviation ARD is 0.037.

关键词

Keywords

references

浏览量

145

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Improving CO2 solubility in a hybrid sorbent of 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide/mesoporous titanium dioxide/water with confinement effect

CO2 absorption performance in a rotating disk reactor using DBU-glycerol as solvent

Determination of physical properties for the mixtures of [BMIM]Cl with different organic solvents

Recovery of carbon monoxide from flue gases by reactive absorption in ionic liquid imidazolium chlorocuprate(I): Mass transfer coefficients

Modeling of Surface Tension and Viscosity for Non-electrolyte Systems by Means of the Equation of State for Square-well Chain Fluids with Variable Interaction Range

Densities and Viscosities of 1-butyl-3-methylimidazolium Hexafluorophosphate [bmim][PF6]+CO2 Binary System：Determination and Correlation

Densities and Viscosities of 1-butyl-3-methylimidazolium Hexafluorophosphate [bmim][PF6]+CO2 Binary System：Determination and Correlation

DOI：

摘要

Abstract

关键词

Keywords

references

Densities and Viscosities of 1-butyl-3-methylimidazolium Hexafluorophosphate [bmim][PF₆]+CO₂ Binary System：Determination and Correlation

Densities and Viscosities of 1-butyl-3-methylimidazolium Hexafluorophosphate [bmim][PF₆]+CO₂ Binary System：Determination and Correlation