One Step Bioleaching of Sulphide Ore with Low Concentration of Arsenic by Aspergillus niger and Taguchi Orthogonal Array Optimization*
|Updated:2026-01-06
|
One Step Bioleaching of Sulphide Ore with Low Concentration of Arsenic by Aspergillus niger and Taguchi Orthogonal Array Optimization*
One Step Bioleaching of Sulphide Ore with Low Concentration of Arsenic by Aspergillus niger and Taguchi Orthogonal Array Optimization*
中国化学工程学报(英文版)2012年20卷第5期 页码:923-929
Affiliations:
1. Key Laboratory for Green Chemical Process of Ministry of Education, School of Chemical Engineering & Pharmacy, Wuhan Institute of Technology,Wuhan,China,430073
2. Mineral Resoures Research Division, Korea Institute of Geoscience and Mineral Resources (KIGAM), 124 Gwahang-no, Yuseong,Daejeon,gu,Korea,305-350
3. Department of Chemistry and Biochemistry, University of Agriculture,Faisalabad,Pakistan,38040
Author bio:
Funds:
Supported by the Program for Changjiang Scholars and Innovative Research Team in University, China (IRT0974);the Higher Education Commission of Pakistan (20-652/R&D/05-43622)
DOI:
中图分类号:
纸质出版:2012
Accepted:
Scan QR Code
Sadia Ilyas, 池汝安, Jae Chun Lee, 等. One Step Bioleaching of Sulphide Ore with Low Concentration of Arsenic by Aspergillus niger and Taguchi Orthogonal Array Optimization*[J]. 中国化学工程学报(英文版), 2012,20(5):923-929.
and Taguchi Orthogonal Array Optimization
Sadia Ilyas, 池汝安, Jae Chun Lee, 等. One Step Bioleaching of Sulphide Ore with Low Concentration of Arsenic by Aspergillus niger and Taguchi Orthogonal Array Optimization*[J]. 中国化学工程学报(英文版), 2012,20(5):923-929.DOI:
and Taguchi Orthogonal Array OptimizationDOI:
One Step Bioleaching of Sulphide Ore with Low Concentration of Arsenic by Aspergillus niger and Taguchi Orthogonal Array Optimization*
A study was carried out to examine the possibility for
Aspergillus niger
strain KBS4 to bioleach metals from sulphide ore with low concentration of arsenic and to optimize the parameters that affect this process by orthogonal array optimization. Fungal sample was collected
purified and sequenced. The bioleaching process was optimized with L25 Taguchi orthogonal experimental array design. Five factors were investigated and 25 batch bioleaching tests were run at five levels for each factor. The parameters were initial pH
particle size
pulp density
initial inoculums and residence time for bioleaching. The experimental results showed that under optimized leaching conditions: pH 5.5
particle size 180 μm
initial inoculums size 3×10
7
spores per ml
pulp density 15% and residence time of 20 days
the bioleach ability of metals were 63% Fe
68% Zn
60% As
79% Cu and 54% Al. The biosorption of metal ions by fungal biomass might occur during the bioleaching process but it did not hinder the removal of metal ions by bioleaching.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.