Densities and Viscosities of the Ionic Liquid[C4mim][PF6]+N,N-dimethylformamide Binary Mixtures at 293.15 K to 318.15 K
|Updated:2026-01-06
|
Densities and Viscosities of the Ionic Liquid[C4mim][PF6]+N,N-dimethylformamide Binary Mixtures at 293.15 K to 318.15 K
Densities and Viscosities of the Ionic Liquid[C4mim][PF6]+N,N-dimethylformamide Binary Mixtures at 293.15 K to 318.15 K
中国化学工程学报(英文版)2008年16卷第2期 页码:256-262
Affiliations:
State Key Laboratory of Chemical Engineering and Department of Chemistry, East China University of Science and Technology,Shanghai,China,200237
Author bio:
Funds:
the National Natural Science Foundation of China(20476025,20776040);Shanghai Municipal Science and Technology Commission of China(05DJ14002);Hubei Key Laboratory of Novel Chemical Reactor and Green Chemical Technology of China(XLHX2007002)
DOI:
中图分类号:
纸质出版:2008
Accepted:
Scan QR Code
耿彦芳, 王腾芳, 虞大红, 等. Densities and Viscosities of the Ionic Liquid[C4mim][PF6]+N,N-dimethylformamide Binary Mixtures at 293.15 K to 318.15 K[J]. 中国化学工程学报(英文版), 2008,16(2):256-262.
mim][PF
耿彦芳, 王腾芳, 虞大红, 等. Densities and Viscosities of the Ionic Liquid[C4mim][PF6]+N,N-dimethylformamide Binary Mixtures at 293.15 K to 318.15 K[J]. 中国化学工程学报(英文版), 2008,16(2):256-262.DOI:
mim][PFDOI:
Densities and Viscosities of the Ionic Liquid[C4mim][PF6]+N,N-dimethylformamide Binary Mixtures at 293.15 K to 318.15 K
Viscosities and densities for 1-butyl-3-methylimidazolium hexafluorophosphate([C
4
mim
]
[PF
6
]
)+
N
N
-dimethylformamide(DMF)binary mixtures have been measured at the temperature range from 293.15 K to 318.15 K.It is shown that the viscosities and densities decrease monotonously with temperature and the content of DMF.Various correlation methods including Arrhenius-like equation
Seddon et al.'s equation
Redlich-Kister equation with four parameters
and other empirical equations were applied to evaluate these experimental data.A model based on an equation of state for estimating the viscosity of mixtures containing ionic liquids were proposed by coupling with the excess Gibbs free energy model of viscosity
which can synchronously calculate the viscosity and the molar volume.The results show that the model gives a deviation of 8.29% for the viscosity
and a deviation of 1.05% for the molar volume when only one temperature-independent adjustable parameter is adopted.The correlation accuracy is further improved when two parameters or one temperature-dependent parameter is used.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Measurement and correlation of physical properties of aqueous solutions of tetrabutylammonium hydroxide, piperazine and their aqueous blends
Determination of physical properties for the mixtures of [BMIM]Cl with different organic solvents
Insight into solute-solute and solute-solvent interactions of semicarbazide hydrochloride in water and D-glucose/D-sucrose+water solutions at temperatures (293.15 to 318.15) K
Investigation of CO2 solubility in monoethanolamine hydrochloride based deep eutectic solvents and physical properties measurements
Densities and viscosities for ionic liquids [BMIM][BF4] and [BMIM][Cl] and their binary mixtures at various temperatures and atmospheric pressure
相关作者
Rizwan Safdar
Abdul Aziz Omar
Lukman B. Ismail
Arhama Bari
Bhajan Lal
Hina Saba
Xinjun Zhu
Ye Chen
相关机构
2 School of Engineering and Physical Science, Heriot-Watt University Malaysia, Federal Territory of Putrajaya, Putrajaya
2 Department of Material and Engineering, Luoyang Institute of Science and Technology
Department of Chemistry, Dyal Singh College, University of Delhi
Department of Chemistry, University of Delhi, Delhi
Department of Chemistry, Amity University Dubai Campus, Dubai International Academic City, Dubai, UAE