
FOLLOWUS
Department of Chemistry and Industrial Chemistry, Genoa University, via Dodecaneso 31, 16146 Genoa, Italy
Department of Physics, Genoa University, via Dodecaneso 33, 16146 Genoa, Italy
Department of Civil, Chemical and Environmental Engineering, Polytechnic School, Genoa University, via Opera Pia 15, 16145 Genoa, Italy
Corresponding author. E-mail address: brown@unige.it(B. Fabiano)
收稿:2025-09-18,
修回:2026-01-09,
录用:2026-01-12,
网络首发:2026-02-14,
纸质出版:2026-06
Scan QR Code
A.P. Reverberi, M. Vocciante, M. Salerno, 等. Synthesis of magnesium hydroxide nanoparticles by spontaneous chemical reaction between aerosolized phases at room temperature conditions[J]. 中国化学工程学报(英文), 2026,94(6):268-279.
A.P. Reverberi, M. Vocciante, M. Salerno, et al. Synthesis of magnesium hydroxide nanoparticles by spontaneous chemical reaction between aerosolized phases at room temperature conditions[J]. Chinese Journal of Chemical Engineering, 2026, 94(6): 268-279.
A.P. Reverberi, M. Vocciante, M. Salerno, 等. Synthesis of magnesium hydroxide nanoparticles by spontaneous chemical reaction between aerosolized phases at room temperature conditions[J]. 中国化学工程学报(英文), 2026,94(6):268-279. DOI:
A.P. Reverberi, M. Vocciante, M. Salerno, et al. Synthesis of magnesium hydroxide nanoparticles by spontaneous chemical reaction between aerosolized phases at room temperature conditions[J]. Chinese Journal of Chemical Engineering, 2026, 94(6): 268-279. DOI:
A flameless method for the synthesis of nanoparticles at room temperature by coalescence of aerosolized droplets inducing a spontaneous chemical reaction between precursors is presented. The process is tested for the production of magnesium hydroxide nanoparticles at room temperature with an experimental setup based on pneumatic atomizers
condense collectors
mixers and a scrubber separator quenching the process of nanoparticle aggregation and collecting the final product in an aqueous dispersion recycled to the spray tower by a closed pressurized circuit. The solid phase is characterized for shape and composition by field emission scanning electron microscopy and for dimension by dynamic light scattering
with average diameters in a range of 29-62 nm. It is shown that the quality of the final product is affected by the volume of the reaction chamber and the concentration of the reagents in the aerosolized droplets. The process does not require the use of capping agents and/or surfactants aiming at damping particles aggregation and it allow obtaining an uncontaminated product whose composition makes it particularly attractive for specific applications where a high purity is needed
like biochemistry
pharmaceutics and theranostics. The mild operating conditions
the low energy demand and relatively low cost of the required equipment allow including this technique in the context of green
inherent safer and sustainable processes for nanoparticles synthesis.
W.J. Yan, P.H. Sun, C. Luo, X.F. Xia, Z.F. Liu, Y.M. Zhao, S.X. Zhang, L. Sun, F. Du, PtCo-based nanocatalyst for oxygen reduction reaction: recent highlights on synthesis strategy and catalytic mechanism, Chin. J. Chem. Eng. 53 (2023) 101-123.
S. Razzaque, M.D. Khan, M. Aamir, M. Sohail, S. Bhoyate, R.K. Gupta, M. Sher, J. Akhtar, N. Revaprasadu, Selective synthesis of bismuth or bismuth selenide nanosheets from a metal organic precursor: investigation of their catalytic performance for water splitting, Inorg. Chem. 60 (3) (2021) 1449-1461.
M. Shoaib, A. Naz, F.A. Osra, S.H. Abro, S.U. Qazi, F.A. Siddiqui, M.R. Shah, A.Z. Mirza, Green synthesis and characterization of silver-entecavir nanoparticles with stability determination, Arab. J. Chem. 14 (3) (2021) 102974.
A.P. Reverberi, M. Vocciante, E. Lunghi, L. Pietrelli, B. Fabiano, New trends in the synthesis of nanoparticles by green methods, Chem. Eng. Trans. 61 (2017) 667-672.
N.S. Zakharov, A.N. Popova, Y.A. Zakharov, V.M. Pugachev, Synthesis of nanostructured FePt systems, J. Phys., Conf. Ser. 1749 (1) (2021) 012012.
X.H. Ge, L.J. Mo, A.H. Yu, C.Z. Tian, X.D. Wang, C. Yang, T. Qiu, Stimuliresponsive emulsions: recent advances and potential applications, Chin. J. Chem. Eng. 41 (2022) 193-209.
M.L. Arsene, I. Răut, M. Călin, M.L. Jecu, M. Doni, A.M. Gurban, Versatility of reverse micelles: from biomimetic models to nano (bio)sensor design, Processes 9 (2) (2021) 345.
T. Jasrotia, S. Chaudhary, A. Kaushik, R. Kumar, G.R. C haudhary, Green chemistry-assisted synthesis of biocompatible Ag, Cu, and Fe 2 O 3 nanoparticles, Mater. Today Chem. 15 (2020) 100214.
K.B. Tan, D.H. Sun, J.L. Huang, T. Odoom-Wubah, Q.B. Li, State of arts on the bio-synthesis of noble metal nanoparticles and their biological application, Chin. J. Chem. Eng. 30 (2021) 272-290.
R.J. Khan, C.Y. Lau, M.U. Farid, M.K. Islam, A.K. An, J. Yi, S.Y. Leu, Woody biomass derived nano lignin-enabled membrane with high structural stability for efficient wastewater treatment, Process. Saf. Environ. Prot. 182 (2024) 595-607.
J. Ju, X.J. Duan, B. Sarkodie, Y.J. Hu, H. Jiang, C.Z. Li, Numerical simulation of flow field and residence time of nanoparticles in a 1000-ton industrial multijet combustion reactor, Chin. J. Chem. Eng. 51 (2022) 86-99.
H.K. Kammler, L. Mädler, S.E. Pratsinis, Flame synthesis of nanoparticles, Chem. Eng. Technol. 24 (6) (2001) 583-596.
W.Y. Teoh, R. Amal, L. Mädler, Flame spray pyrolysis: an enabling technology for nanoparticles design and fabrication, Nanoscale 2 (8) (2010) 1324-1347.
R. Koirala, S.E. Pratsinis, A. Baiker, Synthesis of catalytic materials in flames:opportunities and challenges, Chem. Soc. Rev. 45 (11) (2016) 3053-3068.
M. Olivas-Martinez, H.Y. Sohn, H.D. Jang, K.I. Rhee, Computational fluid dynamic modeling of the flame spray pyrolysis process for silica nanopowder synthesis, J. Nanoparticle Res. 17 (7) (2015) 324.
Y. Sung, V. Raman, H. Koo, M. Mehta, R.O. Fox, Large-eddy simulation modeling of turbulent flame synthesis of titania nanoparticles using a bivariate particle description, AIChE J. 60 (2) (2014) 459-472.
M. Høj, D.K. Pham, M. Brorson, L. Mädler, A.D. Jensen, J.D. Grunwaldt, Two-nozzle flame spray pyrolysis (FSP) synthesis of CoMo/Al 2 O 3 hydrotreating catalysts, Catal. Lett. 143 (5) (2013) 386-394.
J. Sukunta, A. Wisitsoraat, A. Tuantranont, K. Jaruwongrungsee, S. Phanichphant, C. Liewhiran, Mechanistic roles of substitutional Fe dopants on catalytic acetylene-sensing process of flame-made SnO 2 nanoparticles, Arab. J. Chem. 13 (1) (2020) 3043-3059.
B. Buesser, S.E. Pratsinis, Design of nanomaterial synthesis by aerosol processes, Annu. Rev. Chem. Biomol. Eng. 3 (2012) 103-127.
E. Bain Wasmund, S. Saberi, K.S. Coley, Modeling of an aerosol reactor for optimizing product properties, AIChE J. 53 (6) (2007) 1429-1440.
Z.D. Guo, G. Xiong, L.P. Liu, P. Li, L. Hao, Y.Y. Cao, F.P. Tian, Aerosol-assisted synthesis of hierarchical porous titanosilicate molecular sieve as catalysts for cyclohexene epoxidation, J. Porous Mater. 23 (2) (2016) 407-413.
N. Radacsi, A.E.D.M. van der Heijden, A.I. Stankiewicz, J.H. ter Horst, Cold plasma synthesis of high quality organic nanoparticles at atmospheric pressure, J. Nanoparticle Res. 15 (2) (2013) 1445.
A. Jaworek, A.T. Sobczyk, Electrospraying route to nanotechnology: an overview, J. Electrost. 66 (3-4) (2008) 197-219.
K. Soliwoda, M. Rosowski, E. Tomaszewska, B. Tkacz-Szczesna, G. Celichowski, M. Psarski, J. Grobelny, Synthesis of monodisperse gold nanoparticles via electrospray-assisted chemical reduction method in cyclohexane, Colloids Surf. A Physicochem. Eng. Aspects 482 (2015) 148-153.
P.R. Amyotte, F.I. Khan, The role of inherently safer design in process safety, Can. J. Chem. Eng. 99 (4) (2021) 853-871.
A. Bassani, C. Vianello, P. Mocellin, A. Dell'Angelo, G. Spigno, B. Fabiano, G. Maschio, F. Manenti, Aprioristic integration of process operations and risk analysis: definition of the weighted F & EI-based concept and application to AG2S technology, Ind. Eng. Chem. Res. 62 (1) (2023) 500-510.
B. Fabiano, A.P. Reverberi, P.S. Varbanov, Safety opportunities for the synthesis of metal nanoparticles and short-cut approach to workplace risk evaluation, J. Clean. Prod. 209 (2019) 297-3 08.
A.P. Dicks, A. Hent, Green chemistry and associated metrics, in: Green Chemistry Metrics, Springer International Publishing, New York,2014,1-15.
B. Fabiano, M. Salerno, M. Vocciante, O. Soda, A.P. Reverberi, A double closedloop process for nanoparticle synthesis via aerosol mixing and venturi jet scrubbing, Appl. Sci. 15 (14) (2025) 7693.
H.Y. Shen, Y.Z. Liu, One-step synthesis of hydrophobic magnesium hydroxide nanoparticles and their application in flame-retardant polypropylene composites, Chin. J. Chem. Eng. 26 (10) (2018) 2199-2205.
C. Henrist, J.P. Mathieu, C. Vogels, A. Rulmont, R. Cloots, Morphological study of magnesium hydroxide nanoparticles precipitated in dilute aqueous solution, J. Cryst. Growth 249 (1-2) (2003) 321-330.
E. Piperopoulos, E. Mastronardo, M. Fazio, M. Lanza, S. Galvagno, C. Milone, Enhancing the volumetric heat storage capacity of Mg(OH) 2 by the addition of a cationic surfactant during its synthesis, Appl. Energy 215 (2018) 512-522.
P.M. Sy, N. Anton, Y. Idoux-Gillet, S.M. Dieng, N. Messaddeq, S. Ennahar, M. Diarra, T.F. Vandamme, Pickering nano-emulsion as a nanocarrier for pHtriggered drug release, Int. J. Pharm. 549 (1-2) (2018) 299-305.
W. Guo, W.L. Bu, Y.F. Mao, E.Y. Wang, Y.J. Yang, C. Liu, F. Guo, H.M. Mai, H. You, Y. L ong, Magnesium hydroxide as a versatile nanofiller for 3D-printed PLA bone scaffolds, Polymers 16 (2) (2024) 198.
Z.X. Qiu, B.C. Wang, X.F. Zhou, S.Y. Yang, Q.Z. Gao, X. Cai, S.S. Zhang, Y.P. Fang, CdS@Mg(OH) 2 core/shell composite photocatalyst for efficient visible-light photocatalytic overall water splitting, Int. J. Hydrogen Energy 47 (14) (2022) 8729-8738.
A.P. Reverberi, P.S. Varbanov, M. Vocciante, B. Fabiano, Bismuth oxide-related photocatalysts in green nanotechnology: a critical analysis, Front. Chem. Sci. Eng. 12 (4) (2018) 878-892.
C.A. Uko, J.O. Tijani, S.A. Abdulkareem, S. Mustapha, T.C. Egbosiuba, E. Muzenda, Adsorptive properties of MgO/WO 3 nanoadsorbent for selected heavy metals removal from indigenous dyeing wastewater, Process. Saf. Environ. Prot. 162 (2022) 775-794.
C.X. Ding, Z. Jin, Q.X. Li, S.H. Zhou, Y.R. Sun, Effective removal of fluoride from wastewater by magnesium oxide-loaded aeolian sand with high loading ratio, Chin. J. Chem. Eng. 87 (2025) 369-380.
A. Fan, H.J. Gao, Synthesis of MgO nanostructures through simple hydrogen peroxide treatment for carbon capture, Process. Saf. Environ. Prot. 156 (2021) 361-372.
Z. Fattah, M. Rezaei, A. Biabani-Ravandi, A. Irankhah, Preparation of Co-MgO mixed oxide nanocatalysts for low temp erature CO oxidation: optimization of preparation conditions, Process. Saf. Environ. Prot. 92 (6) (2014) 948-956.
G. Balducci, L. Bravo Diaz, D.H. Gregory, Recent progress in the synthesis of nanostructured magnesium hydroxide, CrystEngComm 19 (41) (2017) 6067-6084.
A. Clemente, M.P. Lobera, F. Balas, J. Santamaria, A versatile generator of nanoparticle aerosols. A novel tool in environmental and occupational exposure assessment, Sci. Total Environ. 625 (2018) 978-986.
Y. Li, Y.L. Hou, H. Suo, F. Liu, S.W. Zhang, D.X. Zeng, The effect of supply gas pressure on the atomization characteristics of medical air-compression nebulizers, ACS Omega 10 (21) (2025) 22099-22111.
A. Ramesh Kumar, G. Hota, A. Mehra, K.C. Khilar, Modeling of nanoparticles formation by mixing of two reactive microemulsions, AIChE J. 50 (7) (2004) 1556-1567.
E. Vafa, M. Shahrokhi, A. Molaei Dehkordi, Population balance modeling of barium sulfate nanoparticle synthesis via inverse microemulsion including coagulation effect, Ind. Eng. Chem. Res. 53 (32) (2014) 12705-12719.
A. Bahmanyar, G. Pazuki, M. Nikazar, Online monitoring and mass transfer modelling of the growth of Ni-B nanoparticles in a reverse micelle system, Can. J. Chem. Eng. 97 (S1) (2019) 1440-1450.
Y.C. Li, C.W. Park, Particle size distribution in the synthesis of nanoparticles using microemulsions, Langmuir 15 (4) (1999) 952-956.
R. Bandyopadhyaya, R. Kumar, K.S. Gandhi, Simulation of precipitation reactions in reverse micelles, Langmuir 16 (18) (2000) 7139-7149.
G.V. Mudzhikova, E.N. Brodskaya, Computer simulation of reverse micelles and water-in-oil microemulsions, Colloid J. 74 (3) (2012) 269-279.
H. Samareh Fekri, M. Ranjbar, A. Pardakhty, A systematic study of Cu nanospheres embedded in non-ionic surfactant-based vesicle:photocatalytic efficiency and in vivo imaging study, J. Cluster Sci. 30 (3) (2019) 561-570.
D. Dodoo-Arhin, M. Leoni, P. Scardi, E. Garnier, A. Mittiga, Synthesis, characterisation and stability of Cu 2 O nanoparticles produced via reverse micelles microemulsion, Mater. Chem. Phys. 122 (2-3) (2010) 602-608.
L.B. Liu, N. Xiang, Z.H. Ni, Droplet-based microreactor for the production of micro/nano-materials, Electrophoresis 41 (10-11) (2020) 833-851.
I. Khan, K. Saeed, I. Khan, Nanoparticles: properties, applications and toxicities, Arab. J. Chem. 12 (7) (2019) 908-931.
B.T. Chen, R.A. Fletcher, Y.-S. Cheng, Calibration of aerosol instruments, in:Aerosol Measurement: Principles, Techniques, and Applications, P. Kulkarni, P.A. Baron, K. Willeke(Eds.), John Wiley and Sons, New York,2011.
S.G. Jennings, The mean free path in air, J. Aerosol Sci. 19 (2) (1988) 159-166.
S.R. Wilson, Y. Liu, E.A. Matida, M.R. Johnson, Aerosol deposition measurements as a function of Reynolds number for turbulent flow in a ninetydegree pipe bend, Aerosol Sci. Technol. 45 (3) (2011) 364-375.
M. Heim, R. Wengeler, H. Nirschl, G. Kasper, Particle deposition from aerosol flow inside a T-shaped micro-mixer, J. Micromech. Microeng. 16 (1) (2006) 70-76.
C.N. Davies, Coagulation of aerosols by Brownian motion, J. Aerosol Sci. 10 (2) (1979) 151-161.
J. Geng, H. Park, E. Sajo, Simulation of aerosol coagulation and deposition under multiple flow regimes with arbitrary computational precision, Aerosol Sci. Technol. 47 (5) (2013) 530-542.
A. Chatterjee, M. Kerker, D.D. Cooke, Brownian coagulation of aerosols in the transition regime, J. Colloid Interface Sci. 53 (1) (1975) 71-82.
A. Raponi, S. Romano, G. Battaglia, A. Buffo, M. Vanni, A. Cipollina, D. Marchisio, Computational modeling of magnesium hydroxide precipitation and kinetics parameters identification, Cryst. Growth Des. 23 (7) (2023) 4748-4759.
Q.H. Yuan, Z.W. Lu, P.X. Zhang, X.B. Luo, X.Z. Ren, T.D. Golden, Stu dy of the synthesis and crystallization kinetics of magnesium hydroxide, Mater. Chem. Phys. 162 (2015) 734-742.
S.W. Choi, Y.T. Byun, The effect of platinum precursor concentrations on chlorine sensing characteristics of platinum nanoparticles- loaded single walled carbon nanotubes, Appl. Surf. Sci. 433 (2018) 480-486.
X.K. Zhang, Y.C. Rui, Y.Q. Wang, J.L. Xu, H.Z. Wang, Q.H. Zhang, P. Müller-Buschbaum, SnO 2 nanorod arrays with tailored area density as efficient electron transport layers for perovskite solar cells, J. Power Sources 402 (2018) 460-467.
S. Thakur, R. Kaur, S.K. Mandal, Size dependence of CdS nanoparticles on the precursor concentration and visible light driven photocatalytic degradation of methylene blue, New J. Chem. 45 (27) (2021) 12227-12235.
I. Malinowska, Z. Ryz. yńska, E. Mrotek, T. Klimczuk, A. Zielińska-Jurek, Synthesis of CoFe 2 O 4 nanoparticles: the effect of ionic strength, concentration, and precursor type on morphology and magnetic properties, J. Nanomater. 2020 (1) (2020) 9046219.
A. Kumar, F.M. Du, J.H.V. Lienhard, Caustic soda production, energy efficiency, and electrolyzers, ACS Energy Lett. 6 (10) (2021) 3563-3566.
F. Wu, Z. Zhou, A.L. Hicks, Life cycle impact of titanium dioxide nanoparticle synthesis through physical, chemical, and biological routes, Environ. Sci. Technol. 53 (8) (2019) 4078 -4087.
0
浏览量
0
Downloads
0
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010102001993号