Advancing the industrial production of propylene oxide toward inherent safety and environmental sustainability: A mini review

Jin Hanlin; Tian Yupeng; Liu Yujia; Zhao Chenyang; Yang Yizhou; Gong Ming; Yang Xuejing; Sun Bing

doi:null

Your Location：

Home >

Browse articles >

Advancing the industrial production of propylene oxide toward inherent safety and environmental sustainability: A mini review

Updated：2026-08-24

- Advancing the industrial production of propylene oxide toward inherent safety and environmental sustainability: A mini review
- Advancing the industrial production of propylene oxide toward inherent safety and environmental sustainability: A mini review
- 中国化学工程学报（英文） 2026年94卷第6期页码：259-267
- Affiliations：
  
  East China University of Science and Technology, Shanghai 200237, China
  State Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China
  State Key Laboratory of Chemical Safety, SINOPEC Research Institute of Safety Engineering Co., Ltd., Qingdao 266000, China
  Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Fudan University, Shanghai 200438, China
- Author bio：
  
  Corresponding authors. E-mail addresses: xj.yang@ecust.edu.cn(X. Yang)
  sunb.qday@sinopec.com(B. Sun)
- Funds：
  
  the Open Project of State Key Laboratory of Chemical Safety(SKLCS-2024004)
- DOI：
  中图分类号：
- 收稿：2025-06-03，
  
  修回：2025-10-16，
  
  录用：2025-10-17，
  
  网络首发：2026-01-28，
  
  纸质出版：2026-06
- Accepted：
Scan QR Code
Jin Hanlin, Tian Yupeng, Liu Yujia, 等. Advancing the industrial production of propylene oxide toward inherent safety and environmental sustainability: A mini review[J]. 中国化学工程学报（英文）, 2026,94(6):259-267.

Jin Hanlin, Tian Yupeng, Liu Yujia, et al. Advancing the industrial production of propylene oxide toward inherent safety and environmental sustainability: A mini review[J]. Chinese Journal of Chemical Engineering, 2026, 94(6): 259-267.
Jin Hanlin, Tian Yupeng, Liu Yujia, 等. Advancing the industrial production of propylene oxide toward inherent safety and environmental sustainability: A mini review[J]. 中国化学工程学报（英文）, 2026,94(6):259-267. DOI：

Jin Hanlin, Tian Yupeng, Liu Yujia, et al. Advancing the industrial production of propylene oxide toward inherent safety and environmental sustainability: A mini review[J]. Chinese Journal of Chemical Engineering, 2026, 94(6): 259-267. DOI：

摘要

Abstract

Propylene oxide (PO) is an important chemical intermediate that has experienced a continuous rise in annual demand. Traditional processes such as the chlorohydrin process and hydrogen peroxide-propylene oxide process (HPPO) are gradually being phased out due to environmental pollution

complex procedures

and economic inefficiencies. The discovery of the titanium silicalite-1 zeolite has markedly improved the activity and selectivity of the HPPO process

facilitating its industrial application. Nonetheless

the costs associated with the storage and transportation of H

along with its safety risks during the process

continue to pose a limitation. This paper presents a comprehensive review of the current industrial status

risk analysis

and advancements in inherent safety research concerning the production of PO. The review systematically assesses the advantages and limitations of various production processes

focusing on safety

environmental impact

and lifecycle risk analysis. The gas-phase epoxidation of propylene and electrochemical epoxidation technology have become prominent research areas due to their mild reaction conditions

streamlined processes

and risk reduction at

the source. These approaches provide new directions for inherently-safer PO production. Future efforts should prioritize addressing challenges in catalyst performance and process integration to propel the PO industry toward greater efficiency

safety

and sustainability.

关键词

Keywords

references

Wiley-VCH, Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim, 1991.

X.B. Chen, Production technology and market analysis of propylene oxide downstream industry chain, Techno-Econom. Petrochemi. 38 (2022) 26-30, 54.

Y.S. Dou, X.D. Lv, China's propylene oxide market: 2022 review and 2023 prospect, Petrol. Petrochem. Today 31 (5) (2023) 21-25.

Industrial Structure Adjustment Guidance Catalog, 2024 Edition, Gazette of the State Council of the People's Republic of China, 2024, 7-77, 07.

V. Russo, R. Tesser, E. Santacesaria, M. Di Serio, Chemical and technical aspects of propene oxide production via hydrogen peroxide (HPPO process), Ind. Eng. Chem. Res. 52 (3) (2013) 1168-1178.

C.P. Gordon, H. Engler, A.S. Tragl, M. Plodinec, T. Lunkenbein, A. Berkessel, J. H. Teles, A.N. Parvulescu, C. Copéret, Efficient epoxidation over dinuclear sites in titanium silicalite-1, Nature 586 (7831) (2020) 708-713.

M. Lin, C.J. Xia, B. Zhu, H. Li, X.T. Shu, Green and efficient epoxidation of propylene with hydrogen peroxide (HPPO process) catalyzed by hollow TS-1 zeolite: a 1.0 kt/a pilot-scale study, Chem. Eng. J. 295 (2016) 370-375.

J. Shan, Q. Wang, Q. Wang, Process route and technical transformation of propylene oxide, Tianjin Chem. Ind. 37 (1) (2023) 90-94.

J. Tsuji, J. Yamamoto, M. Ishino, N. Oku, Development of new propylene oxide process, Sumitomo Kagaku 1 (1) (2006) 1-8.

S.L. Lei, Overview of propylene epoxidation process and research advances in epoxidation catalysts, Petrochem. Technol. 53 (3) (2024) 410-417. (in Chinese)

Z.Q. Liu, X.Y. Zhao, J.K. Zhang, Z.Z. Du, J.H. Wang, Optimization of EB/SM distillation processes based on divided wall columns in a PO/SM process with a chaos differential evolution algorithm, ACS Omega 7 (6) (2022) 5471-5484.

J.M. Sun, J. Liu, Y.Y. Liu, A.J. Wang, Study on performance of peroxo molybdenum modified UiO-67 in catalyzing propylene epoxidation, Mod. Chem. Ind. 40 (1) (2020) 106-110. (in Chinese)

E.I. Korchak, M. Pell, Epoxidation using ethylbenzene hydroperoxide with alkali or adsorbent treatment of recycle ethylbenzene, U.S. Pat, 3439001 (1969).

M. Ghanta, D.R. Fahey, D.H. Busch, B. Subramaniam, Comparative economic and environmental assessments of H 2 O 2 -based and tertiary butyl hydroperoxide-based propylene oxide technologies, ACS Sustainable Chem. Eng. 1 (2) (2013) 268-277.

J. Cai, L.N. Wu, Production technology of epichlorohydrin at home and abroad and its market analysis, China Chlor Alkali 5 (2009) 1-6. (in Chinese)

Y.L. Zhang, J.Y. Zhang, B.S. Zhang, R. Si, B. Han, F. Hong, Y.M. Niu, L. Sun, L. Li, B.T. Qiao, K.J. Sun, J.H. Huang, M. Haruta, Boosting the catalysis of gold by O 2 activation at Au-SiO 2 interface, Nat. Commun. 11 (2020) 558.

W.A. Herrmann, D.M. Fritz-Meyer-Weg, W. Wagner, J.G. Kuchler, G. Weichselbaumer, R. Fischer, Use of organorhenium compounds for the oxidation of multiple C-C-bonds, oxidation processes based theron and novel organorhenium compounds, U.S. Pat, 5155247 (1992).

H.J. Lee, T.P. Shi, D.H. Busch, B. Subramaniam, A greener, pressure intensified propylene epoxidation process with facile product separation, Chem. Eng. Sci. 62 (24) (2007) 7282-7289.

A.P. Zhang, X.X. Wang, Study on production process and risk analysis of styrene co-production of propylene oxide, Shandong Chem. Ind. 51 (13) (2022) 185-186. (in Chinese)

Z. Zhang, G. Shi, Polymerization problem i n PO/SM cogeneration unit, Mod. Chem. Ind. 36 (8) (2016) 150-153. (in Chinese)

X.J. Huang, Hazard analysis and safety countermeasures of propylene oxide production process by chlorohydrination, China Petrol. Chem. Stand. Qual. 31 (8) (2011) 46-48. (in Chinese)

J. Jie, Propylene separation process safety for propylene oxide production plants, J. Saf. Environ. 14 (6) (2014) 28-31.

T.A. Kletz, What you don't have, can't leak, Chem. Eng. J. 13 (5) (1978) 37-43.

T.A. Kletz, Inherently safer design: its scope and future, Process Saf. Environ. Prot. 81 (6) (2003) 401-405.

T. Hayashi, K. Tanaka, M. Haruta, Selective vapor-phase epoxidation of propylene over Au/TiO 2 catalysts in the presence of oxygen and hydrogen, J. Catal. 178 (2) (1998) 566-575.

J.Q. Chen, S.J.A. Halin, E.A. Pidko, M.W.G.M. Verhoeven, D.M.P. Ferrandez, E.J. M. Hensen, J.C. Schouten, T.A. Nijhuis, Enhancement of catalyst performance in the direct propene epoxidation: a study into gold-titanium synergy, ChemCatChem 5 (2) (2013) 467-478.

B.S. Uphade, Y. Yamada, T. Akita, T. Nakamura, M. Haruta, Synthesis and characterization of Ti-MCM-41 and vapor-phase epoxidation of propylene using H 2 and O 2 over Au/Ti-MCM-41, Appl. Catal. Gen. 215 (1-2) (2001) 137-148.

B. Taylor, J. Lauterbach, W.N. Delgass, Gas-phase epoxidation of propylene over small gold ensembles on TS-1, Appl. Catal. Gen. 291 (1-2) (2005) 188-198.

N. Sheng, Z.K. Liu, Z.N. Song, D. Lin, X. Feng, Y.B. Liu, X.B. Chen, D. Chen, X.G. Zhou, C.H. Yang, Enhanced stability for propene epoxidation with H 2 and O 2 over wormhole-like hierarchical TS-1 supported Au nanocatalyst, Chem. Eng. J. 377 (2019) 119954.

M. Haruta, B.S. Uphade, S. Tsubota, A. Miyamoto, Selective oxidation of propylene over gold deposited on titanium-based oxides, Res. Chem. Intermed. 24 (3) (1998) 329-336.

J.Q. Lu, X.M. Zhang, J.J. Bravo-Suárez, K.K. Bando, T. Fujitani, S.T. Oyama, Direct propylene epoxidation over barium-promoted Au/Ti-TUD catalysts with H 2 and O2: effect of Au particle size, J. Catal. 250 (2) (2007) 350-359.

Y.J. Liu, C.Y. Zhao, B. Sun, H.W. Zhu, W. Xu, Preparation and modification of Au/TS-1 catalyst in the direct epoxidation of propylene with H 2 and O 2 , Appl. Catal. Gen. 624 (2021) 118329.

X.Y. Chen, S.L. Chen, A.P. Jia, J.Q. Lu, W.X. Huang, Gas phase propylene epoxidation over Au supported on titanosilicates with different Ti chemical environments, Appl. Surf. Sci. 393 (2017) 11-22.

B.S. Uphade, T. Akita, T. Nakamura, M. Haruta, Vapor-phase epoxidation of propene using H 2 and O 2 over Au/Ti-MCM-48, J. Catal. 209 (2) (2002) 331-340.

E. Sacaliuc, A.M. Beale, B.M. Weckhuysen, T.A. Nijhuis, Propene epoxidation over Au/Ti-SBA-15 catalysts, J. Catal. 248 (2) (2007) 235-248.

C.H. Liu, Y.J. Guan, E.J.M. Hensen, J.F. Lee, C.M. Yang, Au/TiO 2 @SBA-15 nanocomposites as catalysts for direct propylene epoxidation with O 2 and H 2 mixtures, J. Catal. 282 (1) (2011) 94-102.

H.N. Shi, Y.Q. Wang, G.Q. Wu, W.P. Feng, Y. Lin, T. Zhang, X. Jin, S.H. Wang, X. X. Wu, P.X. Yao, Deactivation and regeneration of TS-1/SiO 2 catalyst for epoxidation of propylene with hydrogen peroxide in a fixed-bed reactor, Front. Chem. Sci. Eng. 7 (2) (2013) 202-209.

X.T. Li, X.C. Gong, J.L. Wang, S.B. Jin, H. Xu, P. Wu, Post-treatment of Ti-MWW zeolite with potassium fluoride for propylene epoxidation, Front. Chem. Sci. Eng. 18 (8) (2024) 88.

B. Yu, T. Ayvalı, E. Raine, T. Li, M.M. Li, J.W. Zheng, S. Wu, A.A. Bagabas, S.C.E. Tsang, Enhanced propylene oxide selectivity for gas phase direct propylene epoxidation by lattice expansion of silver atoms on nickel nanoparticles, Appl. Catal. B Environ. 243 (2019) 304-312.

M. Sankar, Q. He, R.V. Engel, M.A. Sainna, A.J. Logsdail, A. Roldan, D.J. Willock, N. Agarwal, C.J. Kiely, G.J. Hutchings, Role of the support in gold-containing nanoparticles as heterogeneous catalysts, Chem. Rev. 120 (8) (2020) 3890-3938.

N.X. Li, Y. Chen, Q.H. Shen, B. Yang, M. Liu, L.F. Wei, W. Tian, J.C. Zhou, TS-1 supported highly dispersed sub-5 nm gold nanoparticles toward direct propylene epoxidation using H 2 and O 2 , J. Solid State Chem. 261 (2018) 92-102.

Z. Lu, M. Piernavieja-Hermida, C.H. Turner, Z.L. Wu, Y. Lei, Effects of TiO 2 in low temperature propylene epoxidation using gold catalysts, J. Phys. Chem. C 122 (3) (2018) 1688-1698.

B. Chowdhury, J.J. Bravo-Suárez, N. Mimura, Lu, K.K. Bando, S. Tsubota, M. Haruta, In situ UV- vis and EPR study on the formation of hydroperoxide species during direct gas phase propylene epoxidation over Au/Ti-SiO 2 catalyst, J. Phys. Chem. B 110 (46) (2006) 22995-22999.

J.H. Huang, T. Akita, J. Faye, T. Fujitani, T. Takei, M. Haruta, Propene epoxidation with dioxygen catalyzed by gold clusters, Angew. Chem. Int. Ed. 48 (42) (2009) 7862-7866.

C.H. Turner, J.J. Ji, Z. Lu, Y. Lei, Analysis of the propylene epoxidation mechanism on supported gold nanoparticles, Chem. Eng. Sci. 174 (2017) 229-237.

A.M. Joshi, W.N. Delgass, K.T. Thomson, Mechanistic implica tions of Au n /Tilattice proximity for propylene epoxidation, J. Phys. Chem. C 111 (22) (2007) 7841-7844.

B. Taylor, J. Lauterbach, G.E. Blau, W.N. Delgass, Reaction kinetic analysis of the gas-phase epoxidation of propylene over Au/TS-1, J. Catal. 242 (1) (2006) 142-152.

J.W. Harris, J. Arvay, G. Mitchell, W.N. Delgass, F.H. Ribeiro, Propylene oxide inhibits propylene epoxidation over Au/TS-1, J. Catal. 365 (2018) 105-114.

G. Sankar, J.M. Thomas, C.R.A. Catlow, C.M. Barker, D. Gleeson, N. Kaltsoyannis, The three-dimensional structure of the titanium-centered active site during steady-state catalytic epoxidation of alkenes, J. Phys. Chem. B 105 (38) (2001) 9028-9030.

J.M. Thomas, C.R.A. Catlow, G. Sankar, Determining the structure of active sites, transition states and intermediates in heterogeneously catalysed reactions, Chem. Commun. (24) (2002) 2921 - 2925.

A. Gamba, G. Tabacchi, E. Fois, TS-1 from first principles, J. Phys. Chem. A 113 (52) (2009) 15006-15015.

S. Bordiga, C. Lamberti, F. Bonino, A. Travert, F. Thibault-Starzyk, Probing zeolites by vibrational spectroscopies, Chem. Soc. Rev. 44 (20) (2015) 7262-7341.

M. Signo rile, V. Crocellà, A. Damin, B. Rossi, C. Lamberti, F. Bonino, S. Bordiga, Effect of Ti speciation on catalytic performance of TS-1 in the hydrogen peroxide to propylene oxide reaction, J. Phys. Chem. C 122 (16) (2018) 9021-9034.

M. Signorile, A. Damin, F. Bonino, V. Crocellà, G. Ricchiardi, C. Lamberti, S. Bordiga, Computational assessment of relative sites stabilities and sitespecific adsorptive properties of titanium silicalite-1, J. Phys. Chem. C 122 (3) (2018) 1612-1621.

X. Feng, N. Sheng, Y.B. Liu, X.B. Chen, D. Chen, C.H. Yang, X.G. Zhou, Simultaneously enhanced stability and selectivity for propene epoxidation with H 2 and O 2 on Au catalysts supported on nano-crystalline mesoporous TS-1, ACS Catal. 7 (4) (2017) 2668-2675.

T.A. Nijhuis, J.Q. Chen, S.M.A. Kriescher, J.C. Schouten, The direct epoxidation of propene in the explosive regime in a microreactor: a study into the reaction kinetics, Ind. Eng. Chem. Res. 49 (21) (2010) 10479-10485.

E. Kertalli, M.F. Neira d'Angelo, J.C. Schouten, T.A. Nijhuis, Design and optimization of a catalytic membrane reactor for the direct synthesis of propylene oxide, Chem. Eng. Sci. 138 (2015) 465-472.

E. Kertalli, N. Kosinov, J.C. Schouten, T.A. Nijhuis, Direct synthesis of propylene oxide in a packed bed membrane reactor, Chem. Eng. J. 307 (2017) 9-14.

M. Sasidharan, A.K. Patra, Y. Kiyozumi, A. Bhaumik, Fabrication, characterization and catalytic oxidation of propylene over TS-1/Au membranes, Chem. Eng. Sci. 75 (2012) 250-255.

S.M. Aworinde, A.M. Schweidtmann, A.A. Lapkin, The concept of selectivity control by simultaneous distribution of the oxygen feed and wall temperature in a microstructured reactor, Chem. Eng. J. 331 (2018) 765-776.

F. Dorchies, A. Serva, D. Crevel, J. de Freitas, N. Kostopoulos, M. Robert, O. Sel, M. Salanne, A. Grimaud, Controlling the hydrophilicity of the electrochemical interface to modulate the oxygen-atom transfer in electrocatalytic epoxidation reactions, J. Am. Chem. Soc. 144 (49) (2022) 22734-22746.

M. Ko, Y. Kim, J. Woo, B. Lee, R. Mehrotra, P. Sharma, J. Kim, S.W. Hwang, H.Y. Jeong, H. Lim, S.H. Joo, J.W. Jang, J.H. Kwak, Direct propylene epoxidation with oxygen using a photo-electro-heterogeneous catalytic system, Nat. Catal. 5 (1) (2022) 37-44.

M. Chung, J.H. Maalouf, J.S. Adams, C.Y. Jiang, Y. Román-Leshkov, K. Manthiram, Direct propylene epoxidation via water activation over Pd-Pt electrocatalysts, Science 383 (6678) (2024) 49-55.

W.R. Leow, Y. Lum, A. Ozden, Y.H. Wang, D.H. Nam, B. Chen, J. Wicks, T.T. Zhuang, F.W. Li, D. Sinton, E.H. Sargent, Chloride-mediated selective electrosynthesis of ethylene and propylene oxides at high current density, Science 368 (6496) (2020) 1228-1233.

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Synthesis of magnesium hydroxide nanoparticles by spontaneous chemical reaction between aerosolized phases at room temperature conditions

Collaborative control of array integrated distillation units via multi-agents technique

Fluorosurfactants and their application in droplet microreactors: An overview

Intelligent chemical synthesis based on microchemical engineering technology

Liquid–solid mass transfer in micropacked bed reactors with immiscible liquid–liquid two-phase flow