Enabling nitrogen physisorption of sub-500℃ biochar <italic style="font-style: italic">via</italic> surface removal of condensed pyrolysis vapors

Raoof Bardestani; Mohammadreza Sanasiri

doi:null

Your Location：

Home >

Browse articles >

Enabling nitrogen physisorption of sub-500℃ biochar via surface removal of condensed pyrolysis vapors

Updated：2026-08-24

- Enabling nitrogen physisorption of sub-500℃ biochar via surface removal of condensed pyrolysis vapors
- Enabling nitrogen physisorption of sub-500℃ biochar via surface removal of condensed pyrolysis vapors
- 中国化学工程学报（英文） 2026年94卷第6期页码：26-35
- Affiliations：
  
  Département de Génie Chimique, Pavillon Adrien-Pouliot, Université Laval, Québec,QC, G1V 0A6, Canada
  Department of Chemical and Petroleum Engineering, Sharif University of Technology, Tehran 1136594655, Iran
- Author bio：
  
  Corresponding author. E-mail address: raoof.bardestani.1@ulaval.ca(R. Bardestani)
- Funds：
- DOI：
  中图分类号：
- 收稿：2025-06-11，
  
  修回：2026-01-01，
  
  录用：2026-01-14，
  
  网络首发：2026-03-24，
  
  纸质出版：2026-06
- Accepted：
Scan QR Code
Raoof Bardestani, Mohammadreza Sanasiri. Enabling nitrogen physisorption of sub-500℃ biochar via surface removal of condensed pyrolysis vapors[J]. 中国化学工程学报（英文）, 2026,94(6):26-35.

Raoof Bardestani, Mohammadreza Sanasiri. Enabling nitrogen physisorption of sub-500℃ biochar via surface removal of condensed pyrolysis vapors[J]. Chinese Journal of Chemical Engineering, 2026, 94(6): 26-35.
Raoof Bardestani, Mohammadreza Sanasiri. Enabling nitrogen physisorption of sub-500℃ biochar via surface removal of condensed pyrolysis vapors[J]. 中国化学工程学报（英文）, 2026,94(6):26-35. DOI：

Raoof Bardestani, Mohammadreza Sanasiri. Enabling nitrogen physisorption of sub-500℃ biochar via surface removal of condensed pyrolysis vapors[J]. Chinese Journal of Chemical Engineering, 2026, 94(6): 26-35. DOI：

摘要

Abstract

This research provides insights into the characteristics of biochar produced through pyrolysis below 500℃. These biochars often show surface inaccessibility due to pore blockage caused by heavy condensed vapors

known as tar

generated during biomass pyrolysis. The N

adsorption-desorption isotherms

determining the Brunauer-Emmett-Teller specific surface area(BET-SSA)

were initially investigated after Soxhlet solvent extraction of the tar from a biochar obtained by pyrolyzing spruce-based biomass at 475℃. Solvent extraction proved to be a relatively effective method

allowing N

gas molecules to access the pores. However

this objective was achieved only with appropriate polar aprotic solvents such as dimethyl sulfoxide

resulting in an SSA of 21 m

·g

- 1

. The SSA development of the untreated biochar was then studied using different vacuum degassing conditions implementing response surface methodology. The degassing temperature

a k

ey parameter that affects factors such as sample mass and degassing time

should be kept below 400℃ to preserve the surface morphology of the biochar.

关键词

Keywords

references

J.S. Cha, S.H. Park, S.C. Jung, C. Ryu, J.K. Jeon, M.C. Shin, Y.K. Park, Production and utilization of biochar: a review, J. Ind. Eng. Chem. 40 (2016) 1-15.

M. Tripathi, J.N. Sahu, P. Ganesan, Effect of process parameters on production of biochar from biomass waste through pyrolysis: a review, Renew. Sustain. Energy Rev. 55 (2016) 467-481.

Q. Zhang, J. Chang, T.J. Wang, Y. Xu, Review of biomass pyrolysis oil properties and upgrading research, Energy Convers. Manag. 48 (1) (2007) 87-92.

R. Bardestani, R. Biriaei, S. Kaliaguine, Hydrogenation of furfural to furfuryl alcohol over Ru particles supported on mildly oxidized biochar, Catalysts 10 (8) (2020) 934.

R. Bardestani, G.S. Patience, S. Kaliaguine, Experimental methods in chemical engineering: specific surface area and pore size distribution measurements:BET, BJH, and DFT, Can. J. Chem. Eng. 97 (11) (2019) 2781-2791.

K.Z. Qian, A. Kumar, H.L. Zhang, D. Bellmer, R. Huhnke, Recent advances in utilization of biochar, Renew. Sustain. Energy Rev. 42 (2015) 1055-1064.

J. Corella, A. Orío, P. Aznar, Biomass gasification with air in fluidized bed:reforming of the gas composition with commercial steam reforming catalysts, Ind. Eng. Chem. Res. 37 (12) (1998) 4617-4624.

S. Anis, Z.A. Zainal, Tar reduction in biomass producer gas via mechanical, catalytic and thermal methods: a review, Renew. Sustain. Energy Rev. 15 (5) (2011) 2355-2377.

T. Phuphuakrat, T. Namioka, K. Yoshikawa, Tar removal from biomass pyrolysis gas in two-step function of decomposition and adsorption, Appl. Energy 87 (7) (2010) 2203-2211.

J.J. Manyà, Pyrolysis for biochar purposes: a review to establish current knowledge gaps and research needs, Environ. Sci. Technol. 46 (15) (2012) 7939-7954.

M.B. Pecha, E. Terrell, J.I. Montoya, F. Stankovikj, L.J. Broadbelt, F. Chejne, M. Garcia-Perez, Effect of pressure on pyrolysis of milled wood lignin and acidwashed hybrid poplar wood, Ind. Eng. Chem. Res. 56 (32) (2017) 9079-9089.

W. Suliman, J.B. Harsh, N.I. Abu-Lail, A.M. Fortuna, I. Dallmeyer, M. Garcia-Perez, Influence o f feedstock source and pyrolysis temperature on biochar bulk and surface properties, Biomass Bioenergy 84 (2016) 37-48.

F. Melligan, R. Auccaise, E.H. Novotny, J.J. Leahy, M.H.B. Hayes, W. Kwapinski, Pressurised pyrolysis of Miscanthus using a fixed bed reactor, Bioresour. Technol. 102 (3) (2011) 3466-3470.

O. Mašek, V. Budarin, M. Gronnow, K. Crombie, P. Brownsort, E. Fitzpatrick, P. Hurst, Microwave and slow pyrolysis biochar: comparison of physical and functional properties, J. Anal. Appl. Pyrolysis 100 (2013) 41-48.

M. Krzesińska, B. Pilawa, S. Pusz, J. Ng, Physical characteristics of carbon materials derived from pyrolysed vascular plants, Biomass Bioenergy 30 (2) (2006) 166-176.

T.J. Hilbers, Z.H. Wang, B. Pecha, R.J.M. Westerhof, S.R.A. Kersten, M.R. Pelaez-Samaniego, M. Garcia-Perez, Cellulose-Lignin interactions during slow and fast pyrolysis, J. Anal. Appl. Pyrolysis 114 (2015) 197-207.

R. Bardestani, S. Kaliaguine, Steam activation and mild air oxidation of vacuum pyrolysis biochar, Biomass Bioenergy 108 (2018) 101-112.

Y.F. Shen, Chars as carbonaceous adsorbents/catalysts for tar elimination during biomass pyrolysis or gasification, Renew. Sustain. Energy Rev. 43 (2015) 281-295.

G. Sigmund, T. Hüffer, T. Hofmann, M. Kah, Biochar total surfa ce area and total pore volume determined by N 2 and CO 2 physisorption are strongly influenced by degassing temperature, Sci. Total Environ. 580 (2017) 770-775.

C.E. Brewer, K. Schmidt-Rohr, J.A. Satrio, R.C. Brown, Characterization of biochar from fast pyrolysis and gasification systems, Environ. Prog. Sustain. Energy 28 (3) (2009) 386-396.

D. Lozano-Castelló, D. Cazorla-Amorós, A. Linares-Solano, Usefulness of CO 2 adsorption at 273 K for the characterization of porous carbons, Carbon 42 (7) (2004) 1233-1242.

S.Z. Zhang, L.F. Yan, Efficient capture of carbon dioxide to form organic crystals at low pressure and room temperature, RSC Sustain. 3 (7) (2025) 2962-2969.

D. Kim, J. Park, Y.S. Kim, M.S. Lah, Temperature dependent CO 2 behavior in microporous 1-D channels of a metal-organic framework with multiple interaction sites, Sci. Rep. 7 (2017) 41447.

C. Baehr, R. Acar, C. Hamrita, K. Raffelt, N. Dahmen, CO 2 solubility in fast pyrolysis bio-oil, Ind. Eng. Chem. Res. 62 (38) (2023) 15378-15385.

S.M. Rowland, R. Martinez, C.J. Wrasman, K. Iisa, M.R. Nimlos, M.B. Griffin, Thermal reactivity of bio-oil produced from catalytic fast pyrolysis of biomass, Energy Fuel. 38 (20) (2024) 19626-19638.

I.K.M. Yu, D.C.W. Tsang, S.S. Chen, L. Wang, A. J. Hunt, J. Sherwood, K. De Oliveira Vigier, F. Jérôme, Y.S. Ok, C.S. Poon, Polar aprotic solventwater mixture as the medium for catalytic production of hydroxymethylfurfural (HMF) from bread waste, Bioresour. Technol. 245 (Pt A) (2017) 456-462.

S.H. Mushrif, S. Caratzoulas, D.G. Vlachos, Understanding solvent effects in the selective conversion of fructose to 5-hydroxymethyl-furfural: a molecular dynamics investigation, Phys. Chem. Chem. Phys. 14 (8) (2012) 2637-2644.

S.S. Chen, I.K.M. Yu, D.C.W. Tsang, A.C.K. Yip, E. Khan, L. Wang, Y.S. Ok, C.S. Poon, Valorization of cellulosic food waste into levulinic acid catalyzed by heterogeneous Brønsted acids: temperature and solvent effects, Chem. Eng. J. 327 (2017) 328-335.

F.G. Bordwell, R.J. McCallum, W.N. Olmstead, Acidities and hydrogen bonding of phenols in dimethyl sulfoxide, J. Org. Chem. 49 (8) (1984) 1424-1427.

H. Ming, X. Yang, P. Zheng, Y.F. Zhang, H.X. Jiang, L.B. Zhang, Recent advances of solvent effects in biomass liquefaction conversion, Energies 17 (12) (2024) 2814.

D. Baş,. İH. Boyacı, Modeling and optimization I: usability of response surface methodology, J. Food Eng. 78 (3) (2007) 836 845.

M. Almeida Bezerra, R.E. Santelli, E.P. Oliveira, L.S. Villar, L.A. Escaleira, Response surface methodology (RSM) as a tool for optimization in analytical chemistry, Talanta 76 (5) (2008) 965-977.

K. Yetilmezsoy, S. Demirel, R.J. Vanderbei, Response surface modeling of Pb(II) removal from aqueous solution by Pistacia vera L.: Box-Behnken experimental design, J. Hazard. Mater. 171 (1-3) (2009) 551-562.

R. Bardestani, C. Roy, S. Kaliaguine, The effect of biochar mild air oxidation on the optimization of lead(II) adsorption from wastewater, J. Environ. Manag. 240 (2019) 404-420.

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Biochar as a structure-tunable stationary phase for column chromatographic fractionation of bio-oil

Microfluidic extraction of phenolic compounds from wastewater in the straight/helical/in-plane spiral microchannels

Optimization of methanol distillation process using response surface methodology

Microwave-assisted dehydration of strontium hydroxide octahydrate: Experimental study and kinetic modeling analysis

Box-Behnken experimental design for optimizing process parameters in carbonate-promoted direct thiophene carboxylation reaction with carbon dioxide

Enabling nitrogen physisorption of sub-500℃ biochar via surface removal of condensed pyrolysis vapors

Enabling nitrogen physisorption of sub-500℃ biochar via surface removal of condensed pyrolysis vapors

DOI：

摘要

Abstract

关键词

Keywords

references