During wet complexation denitrification of flue gas
Fe
II
EDTA regeneration
also known as reducing Fe
III
EDTA and Fe
II
EDTA-nitric oxide (NO) to Fe
II
EDTA
is crucial. In this paper
ultraviolet (UV) light was used for the first time to reduce Fe
II
EDTA-NO. The experimental result demonstrated that Fe
II
EDTA-NO reduction rate increased with UV power increasing
elevated temperature
and initial Fe
II
EDTA-NO concentration decreasing. Fe
II
EDTA-NO reduction rate increased first and then decreased as pH value increased (2.0-10.0). Fe
II
EDTA-NO reduction with UV irradiation presented a first order reaction with respect to Fe
II
EDTA-NO. Compared with other Fe
II
EDTA regeneration methods
Fe
II
EDTA regeneration with UV show more superiority through comprehensive consideration of regeneration rate and procedure. Subsequently
NO absorption experiment by Fe
II
EDTA solution with UV irradiation confirmed that UV can significantly promote the NO removal performance of Fe
II
EDTA. Appropriate oxygen concentration (3% (vol)) and acidic environment (pH = 4) was favorable for NO removal. With UV power increasing as well as temperature decreasing
NO removal efficiency rose. In addition
the mechanism research indicates that NO from flue gas is mostly converted to NO
2
-
NO
3
-
NH
4
+
N
2
and N
2
O with Fe
II
EDTA absorption liquid with UV irradiation. UV strengthens NO removal in Fe
II
EDTA absorption liquid by forming a synergistic effect of oxidation-reduction-complexation. Finally
compared with NO removal methods with Fe
II
EDTA
Fe
II
EDTA combined UV system shows prominent technology advantage in terms of economy and secondary pollution.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.