Amine-based solvent for CO<sub>2</sub> absorption and its impact on carbon steel corrosion: A perspective review

Zhe Lun Ooi; Pui Yee Tan; Lian See Tan; Swee Pin Yeap

doi:10.1016/j.cjche.2020.02.029

Your Location：

Home >

Browse articles >

Amine-based solvent for CO₂ absorption and its impact on carbon steel corrosion: A perspective review

Process Systems Engineering and Process Safety | Updated：2026-01-06

- Amine-based solvent for CO₂ absorption and its impact on carbon steel corrosion: A perspective review
- Chinese Journal of Chemical Engineering Vol. 28, Issue 5, Pages: 1357-1367(2020)
- Affiliations：
  
  1. Department of Chemical&Petroleum Engineering, Faculty of Engineering, Technology&Built Environment, UCSI University, 56000, Cheras Kuala Lumpur,Malaysia
  2. Department of Chemical Process Engineering, Malaysia-Japan International Institute of Technology, Universiti Teknologi Malaysia, Jalan Sultan Yahya Petra,Kuala Lumpur,Malaysia,54100
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2020.02.029
  CLC：
- Published：2020
- Accepted：
Scan QR Code
absorption and its impact on carbon steel corrosion: A perspective review[J]. 中国化学工程学报, 2020, 28(5): 1357-1367.
DOI：

absorption and its impact on carbon steel corrosion: A perspective review[J]. 中国化学工程学报, 2020, 28(5): 1357-1367. DOI： 10.1016/j.cjche.2020.02.029.

摘要

Abstract

Carbon dioxide (CO

) is one of the commonly emitted gaseous by-products in industrial processes. While CO

gas is the main cause to greenhouse effect

various CO

capture technologies have been proposed and implemented to sequester the CO

before the waste gases being released into the atmosphere. One of the mature technologies for CO

absorption is by using amine-based solvents. In this regard

different single amine solvents or blended amine solvents have been proven for their capability to remove CO

. However

the dissolution and reaction of CO

gas with the amine solvents turn the solution corrosive. Such phenomenon is undesired as it posts corrosion problem to the absorption column

which normally built of carbon steel material. Henceforth

understanding the behaviour of different amine-based solvents in absorbing CO

and its subsequent impact on carbon steel corrosion is very significant. In this review article

we will outline some of the more commonly used solvents and their respective advantages and disadvantages

motivating further investigation into the co

rrosion tendency. Meanwhile

existing gaps in this research area are discussed for future investigation.

关键词

Keywords

references

Views

990

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Enhanced corrosion resistance of epoxy resin coating via addition of CeO2 and benzotriazole

Corrosion inhibition of carbon steel in hydrochloric acid by cationic arylthiophenes as new eco-friendly inhibitors: Experimental and quantum chemical study

Investigation of CO2 solubility in monoethanolamine hydrochloride based deep eutectic solvents and physical properties measurements

Modeling the rate of corrosion of carbon steel using activated diethanolamine solutions for CO2 absorption

CO2 capture by ternary ionic liquid non-aqueous phase change solvents

Related Author

Xu Han

Ruijie Guo

Baolong Niu

Hong Yan

Abd El-Aziz S. Fouda

Mohamed A. Ismail

Abdulraqeb A. Al-Khamri

Ashraf S. Abousalem

Related Institution

College of Materials Science and Engineering, Taiyuan University of Technology

Key Laboratory of Interface Science and Engineering in Advanced Materials, Ministry of Education, Taiyuan University of Technology

Department of Chemistry, Faculty of Science, El-Mansoura University,-Mansoura

Department of Chemistry, Faculty of Education, Arts and Sciences, University of Saba Region

Quality Control Laboratory, Operations Department, Jotun

⁰

Amine-based solvent for CO2 absorption and its impact on carbon steel corrosion: A perspective review

DOI：10.1016/j.cjche.2020.02.029

摘要

Abstract

关键词

Keywords

references

Amine-based solvent for CO₂ absorption and its impact on carbon steel corrosion: A perspective review