Performance of anaerobic fluidized bed microbial fuel cell with different porous anodes

Xiuli Zhang; Chunhu Li; Qingjie Guo; Kelei Huang

doi:10.1016/j.cjche.2019.10.002

Your Location：

Home >

Browse articles >

Performance of anaerobic fluidized bed microbial fuel cell with different porous anodes

Energy, Resources and Environmental Technology | Updated：2026-01-06

- Performance of anaerobic fluidized bed microbial fuel cell with different porous anodes
- Chinese Journal of Chemical Engineering Vol. 28, Issue 3, Pages: 846-853(2020)
- Affiliations：
  
  1. Key Laboratory of Marine Chemistry Theory and Engineering Technology of Ministry of Education, College of Chemistry and Chemical Engineering, Ocean University of China,Qingdao,China,266100
  2. Key Laboratory of Clean Chemical Processing of Shandong Province, College of Chemical Engineering, Qingdao University of Science and Technology,Qingdao,China,266042
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2019.10.002
  CLC：
- Published：2020
- Accepted：
Scan QR Code
Xiuli Zhang, Chunhu Li, Qingjie Guo, Kelei Huang. Performance of anaerobic fluidized bed microbial fuel cell with different porous anodes[J]. Chinese Journal of Chemical Engineering, 2020, 28(3): 846-853.
DOI：

Xiuli Zhang, Chunhu Li, Qingjie Guo, Kelei Huang. Performance of anaerobic fluidized bed microbial fuel cell with different porous anodes[J]. Chinese Journal of Chemical Engineering, 2020, 28(3): 846-853. DOI： 10.1016/j.cjche.2019.10.002.

摘要

Abstract

Anode materials were used to construct microbial fuel cells (MFCs)

and the characteristics of the anodes were important for successful applied performance of the MFCs. Via the cyclic voltammetry (CV) method

the experiments showed that 5 wt% multiwalled carbon nanotubes (MWNTs) were optimal for the PANI/MWNT film anodes prepared using 24 polymerization cycles. The maximum output voltage of the PANI/MWNT film anodes reached 967.7 mV with a power density of 286.63 mW·m

-2

. Stable output voltages of 860 mV

850 mV

and 870 mV were achieved when the anaerobic fluidized bed microbial fuel cell (AFBMFC) anodes consisted of carbon cloth with carbon black on one side

copper foam and carbon brushes

respectively. Pretreatment of the anodes before starting the AFBMFC by immersion in a stirred bacterial fluid significantly shortened the AFBMFC startup time. After the AFBMFC was continuously run

the anode surfaces generated active microbial catalytic material.

关键词

Keywords

references

Views

135

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Controllable synthesis of Ni3S2/V3S4@NF-xF(x=0, 4, 8) catalysts for efficient hydrogen production in seawater and urea electrolyte

Enhanced mass transfer in flexible electrodes of open-pore cobalt disulfide nanosheets supported on sulfur-doped carbon fibers for efficient zinc-air batteries

Dew-point corrosion process in the atmospheric tower: Integration of electrochemical analysis and interpretable machine learning

Bio-templated graphitic carbon architectures enable high-rate and durable LiFePO4 cathodes for sustainable lithium-ion batteries

Citric acid-modified silicon anode with dual carbon stress modulation for stable lithium storage

Related Author

Wen Wei

Meng Xiangyu

Liu Min

Du Xiaoqiang

Zhang Xiaoshuang

Yu Yanjie

Zhao Jiayu

Cui Yaman

Related Institution

Department of Chemistry, Xinzhou Normal University

Henan Provincial Key Laboratory of Nanocomposites and Applications, Institute of Nanostructured Functional Materials, Huanghe Science and Technology College

School of Chemistry and Chemical Engineering, North University of China

School of Environment and Safety Engineering, North University of China

Center of Energy Storage Materials & Technology, College of Engineering and Applied Sciences, Jiangsu Key Laboratory of Artificial Functional Materials, National Laboratory of Solid State Microstructures and Collaborative Innovation Center of Advanced Microstructures, Nanjing University

⁰