Simulated biomass tar removal mechanism by a Quench Coupled with ADsorption Technology (QCADT)
Energy, Resources and Environmental Technology|Updated:2026-01-06
|
Simulated biomass tar removal mechanism by a Quench Coupled with ADsorption Technology (QCADT)
Chinese Journal of Chemical EngineeringVol. 28, Issue 1, Pages: 279-285(2020)
Affiliations:
1. Jiangsu Key Laboratory of Process Enhancement and New Energy Equipment Technology, Jiangsu Engineering Laboratory of Energy Conservation and Environmental Protection Technologies and Equipment in Process Industry,Nanjing,China,211816
2. School of Mechanical and Power Engineering, Nanjing Tech University,Nanjing,China,211816
3. College of Chemistry and Chemical Engineering, Nanjing Tech University,Nanjing,China,210009
4. School of Engineering, Edith Cowan University, 270 Joondalup Drive, Joondalup, 7,Australia,WA602
Xiaosong Zhang, Jiawei Pan, Liang Wang, Hongqi Sun, Yuezhao Zhu, Haijun Chen. Simulated biomass tar removal mechanism by a Quench Coupled with ADsorption Technology (QCADT)[J]. Chinese Journal of Chemical Engineering, 2020, 28(1): 279-285.
DOI:
Xiaosong Zhang, Jiawei Pan, Liang Wang, Hongqi Sun, Yuezhao Zhu, Haijun Chen. Simulated biomass tar removal mechanism by a Quench Coupled with ADsorption Technology (QCADT)[J]. Chinese Journal of Chemical Engineering, 2020, 28(1): 279-285.DOI: 10.1016/j.cjche.2019.06.007.
Simulated biomass tar removal mechanism by a Quench Coupled with ADsorption Technology (QCADT)
Tar removal is a bottleneck in the smooth commercialization of biomass gasification technology. Based on introducing adsorption process into Quench Coupled with ABsorption Technology (QCABT) previously proposed by the author's group
Quench Coupled with ADsorption Technology (QCADT) has been developed to narrow this gap. Additionally
benzene and naphthalene
which are more similar to the real tar for containing aromatic ring structures
were adopted as light and heavy simulated tar
respectively. Also their removal behavior by QCADT was investigated. The results show that the removal mechanism of QCADT is similar to that of QCABT
except for the higher overall tar removal rate due to adsorption effect. Adsorbents with both micro- and narrow mesopores exhibit a better benzene removal performance
while narrow mesopores play dominant roles in naphthalene removal. Penetration adsorption loading of benzene and naphthalene on AC-1 can reach 0.38 g·g
-1
and 0.34 g·g
-1
respectively. The sawdust hardly has any tar removal effect. Combined micro- and meso-pores
will benefit both deep tar removal and large adsorption rate
providing a high tar removal effic
iency.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
COS generation behavior during desulfurization for H2S over zeolite in simulated blast furnace gas
Ultra-efficient selective removal of 99TcO4-/ReO4- via self-polymerizing cationic organic polymer: Adsorption performance and mechanistic insight
Synthesis of ZSM-5 zeolite from desiliconization solution of coal fly ash and adsorption properties of Pb2+ containing wastewater
Synergistic pre-impregnation and templating strategy for constructing seaweed-based porous biochar with highly efficient Hg2+ adsorption performance
Machine learning for adsorption-related parameters prediction of electronic specialty gases: DFT-based dataset construction and balanced data augmentation
Related Author
Guo Yan
Hou Tuanyuan
Wang Yongjin
Chang Liping
Wang Jiancheng
Liao Junjie
Lu Tangzheng
Feng Jiayi
Related Institution
State Key Laboratory of Clean and Efficient Coal Utilization, Taiyuan University of Technology
College of Chemistry and Chemical Engineering, Xinjiang Normal University
Key Laboratory of Coal Science and Technology, Ministry of Education, Taiyuan University of Technology
College of Chemistry and Chemical Engineering, Taiyuan University of Technology
School of Chemical Engineering and Technology, Tianjin University