Fuzzy comprehensive assessment of running condition for a large-scale centrifugal compressor set

Yanji Sun; Yanqiu Pan; Zhongliang Zhou; Xin Li

doi:10.1016/j.cjche.2019.03.013

Your Location：

Home >

Browse articles >

Fuzzy comprehensive assessment of running condition for a large-scale centrifugal compressor set

Process Systems Engineering and Process Safety | Updated：2026-01-06

- Fuzzy comprehensive assessment of running condition for a large-scale centrifugal compressor set
- Chinese Journal of Chemical Engineering Vol. 27, Issue 12, Pages: 2979-2988(2019)
- Affiliations：
  
  1. School of Chemical Engineering, Dalian University of Technology,Dalian,China,116024
  2. Petro-CyberWorks Information Technology Co., Ltd.,Beijing,China,100020
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2019.03.013
  CLC：
- Published：2019
- Accepted：
Scan QR Code
Yanji Sun, Yanqiu Pan, Zhongliang Zhou, Xin Li. Fuzzy comprehensive assessment of running condition for a large-scale centrifugal compressor set[J]. Chinese Journal of Chemical Engineering, 2019, 27(12): 2979-2988.
DOI：

Yanji Sun, Yanqiu Pan, Zhongliang Zhou, Xin Li. Fuzzy comprehensive assessment of running condition for a large-scale centrifugal compressor set[J]. Chinese Journal of Chemical Engineering, 2019, 27(12): 2979-2988. DOI： 10.1016/j.cjche.2019.03.013.

摘要

Abstract

A fuzzy comprehensive assessment method of running condition was constructed and applied to a large-scale centrifugal compressor set in a petrochemical corporation aiming at the monitoring and early warning of abnormal conditions in industry. The maximal information coefficient (MIC) correlation analysis of indexes was introduced to determine the independent indexes to be assessed

and the dynamic deterioration degree was calculated using the predicted independent indexes by the second-order Markov chain model. The fuzzy membership degree weighting method was employed to assess the running condition of all units in the set. Simple and direct radar chart was used to visualize condition assessment grades. Results showed that the proposed fuzzy comprehensive assessment method successfully assessed the running condition of the set. The constructed method achieved 10 min earlier alarm than the traditional threshold alarm occurred at the specific moment of 00:44 on April 7 of 2018. The method would provide a valuable tool and have a wide engineering application in ensuring the safety and reliability of industrial production.

关键词

Keywords

references

Views

146

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Proposal and evaluation of a new norm index-based QSAR model to predict pEC50 and pCC50 activities of HEPT derivatives

Optimization of chemical looping hydrogen generation process via Aspen Plus—Machine learning integration

Research on composite scale inhibitors for inhibiting calcium carbonate scaling in high temperature geothermal fluid

Improved neural network automation design method for energy saving and carbon emission reduction of petrochemical production processes

A transformer-based model for predicting and analyzing light olefin yields in methanol-to-olefins process

Related Author

Kanwal Shahid

Qiang Wang

Qingzhu Jia

Lei Li

Xue Cui

Shuqian Xia

Peisheng Ma

Li Xinyu

Related Institution

2 School of Marine and Environment Science, Tianjin University of Science and Technology, 13 St. TEDA

3 School of Chemical Engineering and Technology, Tianjin University

Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University

State Key Laboratory of Low-carbon Smart Coal-fired Power Generation and Ultra-clean Emission, China Energy Science and Technology Research Institute Co.,Ltd.

School of Chemical Engineering and Technology, Tianjin University

⁰