Thermal cracking characteristics of <i>n</i>-decane in the rectangular and circular tubes

Zhiliang Lei; Bin Liu; Qin Huang; Kuo He; Zewei Bao; Quan Zhu; Xiangyuan Li

doi:10.1016/j.cjche.2019.01.034

Your Location：

Home >

Browse articles >

Thermal cracking characteristics of n-decane in the rectangular and circular tubes

Fluid Dynamics and Transport Phenomena | Updated：2026-01-06

- Thermal cracking characteristics of n-decane in the rectangular and circular tubes
- Chinese Journal of Chemical Engineering Vol. 27, Issue 12, Pages: 2876-2883(2019)
- Affiliations：
  
  School of Chemical Engineering, Sichuan University,Chengdu,China,610065
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2019.01.034
  CLC：
- Published：2019
- Accepted：
Scan QR Code
-decane in the rectangular and circular tubes[J]. 中国化学工程学报, 2019, 27(12): 2876-2883.
DOI：

-decane in the rectangular and circular tubes[J]. 中国化学工程学报, 2019, 27(12): 2876-2883. DOI： 10.1016/j.cjche.2019.01.034.

摘要

Abstract

To investigate the effect of regenerative cooling channel geometry on pyrolysis of endothermic hydrocarbon fuel

a series of supercritical pyrolysis experiments of

-decane in the rectangular and circular tubes were conducted. Moreover

sensitivity analysis of production of propylene and methane as well as CFD simulation were also done. The results showed that gas yield and conversion in the circular tube with an inner diameter of 2 mm had a similar tendency with the one of 1.5 mm in inner diameter. The conversion in the circular tube was much less than that in the rectangular tube at the same outlet temperature. The heat sink of the rectangular tube at the same outlet temperature was larger than that of circular tubes

but the temperature at the corner of the rectangular tube was relatively high. According to the experimental data of the test tubes

a correlation between the conversion and the temperature in the rectangular and circular tubes at the same outlet temperature was fitted

providing a reference for the design of regenerative cooling channels.

关键词

Keywords

references

Views

132

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Effect of sodium zeolite mixed metal oxide catalysts on catalytic conversion of mixed-density plastic into carbon nanotubes and hydrogen fuel

Temperature-dependent pyrolysis product modulation driven by thermal pretreatment of Shendong coal

Thermal decomposition behavior and kinetics of magnesite under carbon dioxide atmosphere

Modification mechanism of caking property of polystyrene waste using low-temperature pyrolysis and its use in coal-blending coking

Ensemble learning-driven multi-objective optimization of the co-pyrolysis process of biomass and coal for high economic and environmental performance

Related Author

Farzin Sheikh

Hammad Hussain

Muhammad Yasin Naz

Bilal Shoukat

Yasin Khan

Muhammad Shoaib

Qiang Luyao

Bai Boyang

Related Institution

Department of Physics, University of Agriculture Faisalabad

Department of Agricultural Engineering, Faculty of Agricultural Engineering & Technology, University of Agriculture Faisalabad

Department of Electrical Engineering, College of Engineering, King Saud University, Riyadh 11451, Saudi Arabia

Center for Green Innovation, University of Science and Technology Beijing

College of Chemistry and Chemical Engineering, Xi'an Shiyou University

⁰

Thermal cracking characteristics of n-decane in the rectangular and circular tubes

DOI：10.1016/j.cjche.2019.01.034

摘要

Abstract

关键词

Keywords

references