Desorption isotherms and isosteric heat of anaerobic fermentation residues
Chemical Engineering Thermodynamics|Updated:2026-01-06
|
Desorption isotherms and isosteric heat of anaerobic fermentation residues
Chinese Journal of Chemical EngineeringVol. 27, Issue 10, Pages: 2510-2517(2019)
Affiliations:
Department of Building Services and Process Engineering, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, Bertalan Lajos u. 4-6,- Budapest,H,Hungary,1111
Tibor Poós, Viktor Szabó. Desorption isotherms and isosteric heat of anaerobic fermentation residues[J]. Chinese Journal of Chemical Engineering, 2019, 27(10): 2510-2517.
DOI:
Tibor Poós, Viktor Szabó. Desorption isotherms and isosteric heat of anaerobic fermentation residues[J]. Chinese Journal of Chemical Engineering, 2019, 27(10): 2510-2517.DOI: 10.1016/j.cjche.2019.01.013.
Desorption isotherms and isosteric heat of anaerobic fermentation residues
摘要
Abstract
This paper presents the equilibrium desorption isotherms and the isosteric heat of sorption of a mixture containing mechanically dewatered fermentation residue (obtained from a blend of chicken
swine and cattle manure) used in biogas plants and corn spoiled silage in a ratio of 2:1. The moisture desorption isotherms of the fermentation residue were determined at 32℃
40℃ and 80℃ and in the relative humidity range of 0.057/1 using static gravimetric method. Mathematical equations were used to analyze the desorption data of Modified Henderson
Modified Halsey
Modified Oswin
Modified Chung-Pfost and Modified GAB models. The constants of the model equations were calculated by non-linear regression analysis. The Modified Henderson model fitted to the desorption isotherm data well. Using the proposed function
the final moisture content of the material can be determined as long as it can be dried in infinite time with the drying gas in the given conditions. The isosteric heat of desorption was calculated by using the Modified Henderson model in the studied temperature range based on the Clausius-Clapeyron equation. The isosteric heat varied between 46 kJ·mol
-1
and 67 kJ·mol
-1
at moisture level
s 1.91
X
e
4.05 kg
H
2
O·kg
dP
-1
for the material.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Void fraction measurement and calculation model of vertical upward co-current air–water slug flow
Adsorption of 2-naphthalenesulfonic acid/sulfuric acid/sulfurous acid from aqueous solution by iron-impregnated weakly basic resin: Equilibrium and model
Experimental and numerical studies of holdup and velocity behavior for inclined bubbly oil-water pipe flows
Variable pseudo-particle modeling for molecular dynamics simulation
Improved neural network automation design method for energy saving and carbon emission reduction of petrochemical production processes
Related Author
Teng Wang
Miao Gui
Jinle Zhao
Qincheng Bi
Tao Zhang
Changhai Li
Dongmei Jia
Tang Ziyan
Related Institution
State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University
School of Nuclear Science and Technology, Xi’an Jiaotong University
2 Research Center of Chemical Engineering and Technology, Binzhou University
School of Electrical and Information Engineering, Tianjin University
China Mobile GBA (Greater Bay Area) Innovation Institute