Extending the EMMS/bubbling model to fluidization of binary particle mixture: Formulation and steady-state validation

Nouman Ahmad; Yujie Tian; Bona Lu; Kun Hong; Haifeng Wang; Wei Wang

doi:10.1016/j.cjche.2018.04.011

Your Location：

Home >

Browse articles >

Extending the EMMS/bubbling model to fluidization of binary particle mixture: Formulation and steady-state validation

Fluid Dynamics and Transport Phenomena | Updated：2026-01-06

- Extending the EMMS/bubbling model to fluidization of binary particle mixture: Formulation and steady-state validation
- Chinese Journal of Chemical Engineering Vol. 27, Issue 1, Pages: 54-62(2019)
- Affiliations：
  
  1. 2 University of Chinese Academy of Sciences,Beijing,China,100049
  2. 3 Jiangsu Provincial Engineering Laboratory for Advanced Materials of Salt Chemical Industry, Huaiyin Institute of Technology,Huai'an,China,223003
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2018.04.011
  CLC：
- Published：2019
- Accepted：
Scan QR Code
Nouman Ahmad, Yujie Tian, Bona Lu, Kun Hong, Haifeng Wang, Wei Wang. Extending the EMMS/bubbling model to fluidization of binary particle mixture: Formulation and steady-state validation[J]. Chin.J.Chem.Eng., 2019, 27(1): 54-62.
DOI：

Nouman Ahmad, Yujie Tian, Bona Lu, Kun Hong, Haifeng Wang, Wei Wang. Extending the EMMS/bubbling model to fluidization of binary particle mixture: Formulation and steady-state validation[J]. Chin.J.Chem.Eng., 2019, 27(1): 54-62. DOI： 10.1016/j.cjche.2018.04.011.

摘要

Abstract

The EMMS/bubbling model originally proposed for fluidization of monodisperse particles is extended to fluidization of binary particle mixture in this study. The dense and dilute phases are considered to comprise of two types of particles differing in size and/or density. Governing equations and the stability condition are then formulated and solved by using an optimization numerical scheme. The effects of bubble diameter are first investigated and a suitable bubble diameter correlation is chosen. Preliminary validation for steady state behavior shows the extended model can fairly capture the overall hydrodynamic behaviors in terms of volume fraction of bubbles and average bed voidage for both monodisperse and binary particle systems. This encourages us to integrate this model with CFD for more validations in the future.

关键词

Keywords

references

Views

195

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

EMMS-based modeling of gas-solid generalized fluidization: Towards a unified phase diagram

Numerical simulation of circulating fluidization roasting desulfurization of high-sulfur bauxite based on computational particle fluid dynamics method

Influences of polymorphism of packed particles on bulk characterizations in fluidization realm

Hydrogen release of NaBH4 below 60 °C with binary eutectic mixture of xylitol and erythritol additive

Particle agglomeration and inhibition method in the fluidized pyrolysis reaction of waste resin

Related Author

Juanbo Liu

Xinhua Liu

Wei Ge

Langfeng Fan

Chengming Xie

Qijin Wei

Hongliang Zhao

Rongbin Li

Related Institution

Dalian National Laboratory for Clean Energy

School of Chemical Engineering, University of Chinese Academy of Sciences

State Key Laboratory of Multiphase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences

Department of Materials Science and Engineering, The University of Utah

State Key Laboratory of Heavy Oil Processing, China University of Petroleum

⁰