Shell powder as a novel bio-filler for thermal insulation coatings

Peigen Zhang; Jingwen Tang; Qiang Tang; Minzhao Zhang; Luwei Shen; Wubian Tian; Yamei Zhang; Zhengming Sun

doi:10.1016/j.cjche.2018.02.006

Your Location：

Home >

Browse articles >

Shell powder as a novel bio-filler for thermal insulation coatings

Energy, Resources and Environmental Technology | Updated：2026-01-06

- Shell powder as a novel bio-filler for thermal insulation coatings
- Chinese Journal of Chemical Engineering Vol. 27, Issue 2, Pages: 452-458(2019)
- Affiliations：
  
  2 Jiangsu Key Laboratory of Construction Materials, School of Materials Science and Engineering, Southeast University,Nanjing,China,211189
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2018.02.006
  CLC：
- Published：2019
- Accepted：
Scan QR Code
Peigen Zhang, Jingwen Tang, Qiang Tang, Minzhao Zhang, Luwei Shen, Wubian Tian, Yamei Zhang, Zhengming Sun. Shell powder as a novel bio-filler for thermal insulation coatings[J]. Chin.J.Chem.Eng., 2019, 27(2): 452-458.
DOI：

Peigen Zhang, Jingwen Tang, Qiang Tang, Minzhao Zhang, Luwei Shen, Wubian Tian, Yamei Zhang, Zhengming Sun. Shell powder as a novel bio-filler for thermal insulation coatings[J]. Chin.J.Chem.Eng., 2019, 27(2): 452-458. DOI： 10.1016/j.cjche.2018.02.006.

摘要

Abstract

The feasibility of employing shell powder as a novel bio-filler to prepare fluorocarbon coating is demonstrated. According to the relevant Chinese standards

the thermal and mechanical properties of the shell powder-filled fluorocarbon coating were evaluated

and compared with those filled by commercial calcium carbonate. All the shell powder-filled coatings can meet the requirements stated in the relevant standards

and with decreasing the particle size of the shell powders

the performance of the thermal insulation coating is enhanced. The coating (SC3) filled by shell powders with an average particle size of 2.81 μm possesses a better thermal insulation performance than the coating (CC) filled by commercial calcium carbonate. The coating SC3 has comparable adhesive force and washing resistance with the coating CC

and in the washing resistance test

after 2000 cycles

the coating SC3 was still able to cover totally their substrates. This work demonstrates a high value-added disposal method for the aquacultural wastes.

关键词

Keywords

references

Views

129

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Research on the electrostatic spray characteristics of ethanol/n-butanol blended fuels

Experimental and numerical studies of holdup and velocity behavior for inclined bubbly oil-water pipe flows

Biochar as a structure-tunable stationary phase for column chromatographic fractionation of bio-oil

Non-phosgene synthesis processes of isocyanates: One-step and two-step routes

Dynamic behavior of a single bubble in cavity flow driven by a turbulent channel

Related Author

No data

Related Institution

No data

⁰