Morphological, mechanical and thermal properties of cyanate ester/benzoxazine resin composites reinforced by silane treated natural hemp fibers

Abdeldjalil Zegaoui; Ruikun Ma; Abdul Qadeer Dayo; Mehdi Derradji; Jun Wang; Wenben Liu; Yile Xu; Wan'an Cai

doi:10.1016/j.cjche.2018.01.008

Your Location：

Home >

Browse articles >

Morphological, mechanical and thermal properties of cyanate ester/benzoxazine resin composites reinforced by silane treated natural hemp fibers

Materials and Product Engineering | Updated：2026-01-06

- Morphological, mechanical and thermal properties of cyanate ester/benzoxazine resin composites reinforced by silane treated natural hemp fibers
- Chinese Journal of Chemical Engineering Vol. 26, Issue 5, Pages: 1219-1228(2018)
- Affiliations：
  
  Institute of Composite Materials, Key Laboratory of Superlight Material and Surface Technology of Ministry of Education, College of Materials Science and Chemical Engineering, Harbin Engineering University,Harbin,China,150001
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2018.01.008
  CLC：
- Published：2018
- Accepted：
Scan QR Code
Abdeldjalil Zegaoui, Ruikun Ma, Abdul Qadeer Dayo, Mehdi Derradji, Jun Wang, Wenben Liu, Yile Xu, Wan'an Cai. Morphological, mechanical and thermal properties of cyanate ester/benzoxazine resin composites reinforced by silane treated natural hemp fibers[J]. Chin.J.Chem.Eng., 2018, 26(5): 1219-1228.
DOI：

Abdeldjalil Zegaoui, Ruikun Ma, Abdul Qadeer Dayo, Mehdi Derradji, Jun Wang, Wenben Liu, Yile Xu, Wan'an Cai. Morphological, mechanical and thermal properties of cyanate ester/benzoxazine resin composites reinforced by silane treated natural hemp fibers[J]. Chin.J.Chem.Eng., 2018, 26(5): 1219-1228. DOI： 10.1016/j.cjche.2018.01.008.

摘要

Abstract

This present study deals with the reinforcement of thermosetting resin blends composed of cyanate ester (CE) and benzoxazine (BOZ) resins with natural hemp fibers (NHFs). These NHFs were initially treated by using a silane coupling agent (SCA) in order to chiefly enhance their distributions as well as adhesions within the CE/BOZ resin matrix

then incorporated with various weight amounts ranging from 5 wt% to 20 wt% with a regular interval of 5 wt%. The obtained results showed that at the maximum treated fiber loading (20 wt%)

distinctive enhancements in the mechanical properties in terms of flexural strength and microhardness were obtained. Besides

the thermal stability and glass transition temperature (T

) were appreciably enhanced and were higher than those of the pure CE/BOZ resin properties. With respect to the astonishing properties of the NHFs

these enhancements could be possibly due to the good dispersion and adhesion of the treated NHFs inside the CE/BOZ resin achieved upon using the SCA. Therefore

we believe herein that these renewable and cheap NHFs have considerable potential to be used as reinfocer materials for CE/BOZ r

esin composites to be used in various industrial sectors.

关键词

Keywords

references

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

A soft sensing method for mechanical properties of hot-rolled strips based on improved co-training

Thermal aging and pyrolysis behavior of hyperbranched polymers grafted carbon fibers reinforced phthalonitrile/cyanate ester blend composites

Preparation and extrusion of ZSM-5 based on biomass templates for enhanced mechanical properties and catalytic pyrolysis performance

Properties evolutions during carbonization of carbon foam using lignin as sole precursor

Enhanced thermal conductivity and mechanical properties of boron nitride@polymethylacrylimide/epoxy composites with self-assembled stable three-dimensional network

Related Author

Hao Ye

Jianye Xue

Bowen Shi

Mehdi Derradji

Wenbin Liu

Zhongcheng Pan

Zhiyi Guo

Jun Wang

Related Institution

Department of Automation, Tsinghua University

UER Procédés Energétiques, Ecole Militaire Polytechnique, BP 17, Bordj El-Bahri, Algiers Algeria

College of Materials Science and Chemical Engineering, Harbin Engineering University

Institute of Chemical Industry of Forest Products, Chinese Academy of Forestry (CAF)

Fujian Provincial Key Laboratory of Biomass Low-Carbon Conversion, Huaqiao University

⁰