Optimization of hydrogen networks with multiple impurities and impurity removal

Xuexue Jia; Guilian Liu

doi:10.1016/j.cjche.2016.04.047

Your Location：

Home >

Browse articles >

Optimization of hydrogen networks with multiple impurities and impurity removal

Process Systems Engineering and Process Safety | Updated：2026-01-06

- Optimization of hydrogen networks with multiple impurities and impurity removal
- Chinese Journal of Chemical Engineering Vol. 24, Issue 9, Pages: 1236-1242(2016)
- Affiliations：
  
  School of Chemical Engineering and Technology, Xi'an Jiaotong University,Xi'an,China,710049
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2016.04.047
  CLC： 10.1016/j.cjche.2016.04.047
- Published：2016
- Accepted：
Scan QR Code
Xuexue Jia, Guilian Liu. Optimization of hydrogen networks with multiple impurities and impurity removal[J]. , 2016, 24(9): 1236-1242.
DOI：

Xuexue Jia, Guilian Liu. Optimization of hydrogen networks with multiple impurities and impurity removal[J]. , 2016, 24(9): 1236-1242. DOI： 10.1016/j.cjche.2016.04.047.

摘要

中图分类号:

Abstract

To explore the effect of removing different impurities to hydrogen networks

an MINLP model is proposed with all matching possibilities and the trade-off between operation cost and capital cost is considered. Furthermore

the impurity remover

hydrogen distribution

compressor and pipe setting are included in the model. Based on this model

the impurity and source(s) that are in higher priority for impurity removal

the optimal targeted concentration

and the hydrogen network with the minimum annual cost can be identified. The efficiency of the proposed model is verified by a case study.

关键词

Keywords

references

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Integration strategies of hydrogen network in a refinery based on operational optimization of hydrotreating units

Optimizing energy efficiency in fluid catalytic cracking units with GA and NSGA-II: A comprehensive simulation and multi-factor analysis

Enhancing corrosion resistance of heat-assisted forming titanium bipolar plate for proton exchange membrane fuel cell through optimized heat treatment

Novel intensification strategy for the liquid-only transfer dividing wall column separating ternary mixtures based on the column grand composite curve

Source term estimation of hazardous gas leakages under turbulent atmospheric transport dispersion scenarios

Related Author

Le Wu

Xiaoqiang Liang

Lixia Kang

Yongzhong Liu

Han Rui

Guan Qingshan

Gu Leqi

Sun Xiaoyan

Related Institution

Department of Chemical Engineering, Xi'an Jiaotong University

Key Laboratory of Thermo-Fluid Science and Engineering, Ministry of Education

College of Chemical Engineering, Qingdao University of Science and Technology

Anhui Metaenergy Technologies Co., Ltd

Center of Ionic Liquid and Green Energy, Beijing Key Laboratory of Solid State Battery and Energy Storage Process, State Key Laboratory of Mesoscience and Engineering, Institute of Process Engineering, Chinese Academy of Sciences

⁰