Thermodynamic analysis on the direct preparation of metallic vanadium from NaVO3 by molten salt electrolysis
第25届中国过程控制会议专栏|Updated:2026-01-06
|
Thermodynamic analysis on the direct preparation of metallic vanadium from NaVO3 by molten salt electrolysis
Chinese Journal of Chemical EngineeringVol. 24, Issue 5, Pages: 671-676(2016)
Affiliations:
2 National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences,Beijing,China,100190
by molten salt electrolysis[J]. Chinese Journal of Chemical Engineering, 2016, 24(5): 671-676.
DOI:
by molten salt electrolysis[J]. Chinese Journal of Chemical Engineering, 2016, 24(5): 671-676.DOI: 10.1016/j.cjche.2016.01.006.
Thermodynamic analysis on the direct preparation of metallic vanadium from NaVO3 by molten salt electrolysis
摘要
Abstract
A novel and environmentally friendly route to directly prepare metallic vanadium from NaVO
3
by molten salt electrolysis is proposed. The feasibility about the direct electro-reduction of NaVO
3
to metallic vanadium is analyzed based on the thermodynamic calculations and experimental verifications. The theoretical decomposition voltage of NaVO
3
to metallic vanadium is only 0.47 V at 800℃ and much lower than that of the alkali and alkali earth metal chloride salts. The value is slightly higher than that of low-valence vanadium oxides such as V
2
O
3
V
3
O
5
and VO. However
the low-valence vanadium oxides can be further electro-reduced to metallic vanadium thermodynamically. The thermodynamic analysis is verified by the experimental results. The direct preparation of metallic vanadium from NaVO
3
by molten salt electrolysis is feasible.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Thermodynamic feasibility of nickel and cerium oxides as versatile oxygen carriers in chemical looping reforming of methane-rich feedstocks
Syngas production from chemical looping reforming of ethanol over iron-based oxygen carriers: Theoretical analysis and experimental investigation
Investigation into Syngas Generation from Solid Fuel Using CaSO4-based Chemical Looping Gasification Process
CFD-PBM simulation of liquid-liquid dispersions in an industrial pulsed disc and doughnut column with directly measured breakup and coalescence kernels
Research on the electrostatic spray characteristics of ethanol/n-butanol blended fuels
Related Author
Marie-Nour Kaydouh
Elie Chalhoub
Ahmed S. Al-Fatesh
Nissrine El Hassan
Atif Abdalazeez
Wenju Wang
Siddig Abuelgasim
刘永卓
Related Institution
Petroleum Engineering Program, School of Engineering, Lebanese American University, P.O. Box 36, Byblos
Chemical Engineering Program, School of Engineering, Lebanese American University, P.O. Box 36, Byblos
Chemical Engineering Department, College of Engineering, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia
School of Energy and Power Engineering, Nanjing University of Science and Technology
Department of Mechanical Engineering, University of Kassala, Kassala