Ceramic Supported PDMS and PEGDA Composite Membranes for CO2 Separation
分离科学与工程|Updated:2026-01-06
|
Ceramic Supported PDMS and PEGDA Composite Membranes for CO2 Separation
Chinese Journal of Chemical EngineeringVol. 21, Issue 4, Pages: 348-3561004-954160478-4(2013)
Affiliations:
State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemistry and Chemical Engineering, Nanjing University of Technology,Nanjing,China,210009
Composite membranes have attracted increasing attentions owing to their potential applications for CO
2
separation. In this work
ceramic supported polydimethylsiloxane (PDMS) and poly (ethylene glycol) diacrylate (PEGDA) composite membranes were prepared. The microstructure and physicochemical properties of the composite membranes were characterized. Preparation conditions were systematically optimized. The gas separation performance of the as-prepared membranes was studied by pure gas and binary gas permeation measurement of CO
2
N
2
and H
2
. Experiments showed that PDMS
as silicone rubber
exhibited larger permeance and lower separation factors. Conversely
PEGDA composite membrane presented smaller gas permeance but higher ideal selectivity for CO
2
/N
2
. Compared to the performance of those membranes using polymeric supports or freestanding membranes
the two kinds of ceramic supported composite membranes exhibited higher gas permeance and acceptable selectivity. Therefore
the ceramic supported composite membrane can be expected as a candidate for CO
2
separation from light gases.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.