strontium adsorption from sulfuric acid solution by different Dowex 50W-X ion exchange resins was investigated.Among these resins
Dowex 50W-X8 resin showed the maximum sorption of strontium from the aqueous solutions.The effect of pH
contact time
mass of resin
temperature
and concentration of interfering ions on strontium adsorption were evaluated to determine the optimum conditions of strontium sorption process.The kinetic models of sorption were analyzed using pseudo-first and pseudo-second order models.The results indicated that the pseudo-second order kinetic model was more appropriate than the other one.Moreover
the data obtained in this study were fitted into several sorption isotherm models and it was found that the Langmuir sorption isotherm shows the best fitting to the experimental data.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Ultra-efficient selective removal of 99TcO4-/ReO4- via self-polymerizing cationic organic polymer: Adsorption performance and mechanistic insight
Mass transfer and kinetic behavior studies on cycloaddition of carbon dioxide with propylene oxide catalyzed by ionic liquid in microchannel reactor
The investigation of Gemini surfactant effects on CH4 and CO2 hydrates
A highly efficient La-modified ZnAl-LDO catalyst and its performance in the synthesis of dimethyl carbonate from methyl carbamate and methanol
Efficient conversion of CO2 into cyclic carbonates under atmospheric by halogen and metal-free poly(ionic liquid)s
Related Author
Lu Tangzheng
Feng Jiayi
Kang Yong
Yang Yiqian
Chen Yu
Wang Gang
Yan Hanwen
Wang Lili
Related Institution
School of Chemical Engineering and Technology, Tianjin University
State Key Laboratory of Mesoscience and Engineering, CAS Key Laboratory of Green Process and Engineering, Beijing Key Laboratory of Solid-State Battery and Energy Storage Process, Institute of Process Engineering, Chinese Academy of Sciences
Institute of Process Systems Engineering, College of Chemical Engineering, Qingdao University of Science and Technology
State Key Laboratory of Heavy Oil Processing, China University of Petroleum (Beijing)