Simulation of Morphologies and Mechanical Properties of A/B Polymer Blend Film

赵学哲; 邓声威; 黄永民; 刘洪来; 胡英

doi:10.1016/S1004-9541(11)60020-7

Your Location：

Home >

Browse articles >

Simulation of Morphologies and Mechanical Properties of A/B Polymer Blend Film

Updated：2026-01-06

- Simulation of Morphologies and Mechanical Properties of A/B Polymer Blend Film
- Chinese Journal of Chemical Engineering Vol. 19, Issue 4, Pages: 549-557(2011)
- Affiliations：
  
  Key Laboratory for Advanced Materials and Department of Chemistry, East China University of Science and Technology,Shanghai,China,200237
- Author bio：
- Funds：
- DOI：10.1016/S1004-9541(11)60020-7
  CLC：
- Published：2011
- Accepted：
Scan QR Code
ZHAO Xuezhe, DENG Shengwei, HUANG Yongmin, LIU Honglai, HU Ying. Simulation of Morphologies and Mechanical Properties of A/B Polymer Blend Film [J]. , 2011, 19(4): 549-557.
DOI：

ZHAO Xuezhe, DENG Shengwei, HUANG Yongmin, LIU Honglai, HU Ying. Simulation of Morphologies and Mechanical Properties of A/B Polymer Blend Film [J]. , 2011, 19(4): 549-557. DOI： 10.1016/S1004-9541(11)60020-7.

摘要

Abstract

The effects of blend composition and micro-phase structure on the mechanical behavior of A/B polymer blend film are studied by coupling the Monte Carlo(MC) simulation of morphology with the lattice spring model(LSM) of micro mechanics of materials.The MC method with bond length fluctuation and cavity diffusion algorithm on cubic lattice is adopted to simulate the micro-phase structure of A/B polymer blend.The information of morphology and structure is then inputted to the LSM composed of a three-dimensional network of springs to obtain the mechanical properties of polymer blend film.Simulated results show that the mechanical response is mainly affected by the density and the composition of polymer blend film through the morphology transition.When a force is applied on the outer boundary of polymer blend film

the vicinity of the inner cavities experiences higher stresses and strains responsible for the onset of crack propagation and the premature failure of the entire system.

关键词

Keywords

references

Views

1499

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Diffusion enhancement for damaged porous media with fractal geometry using a generalized tree-like bifurcation network model

The effect of ZIF-90 particle in Pebax/Psf composite membrane on the transport properties of CO2, CH4 and N2 gases by Molecular Dynamics Simulation method

Molecular reconstruction model based on structure oriented lumping and group contribution methods

Mechanisms of competitive adsorption and diffusion of ethyl sulfide and n-butyl mercaptan with cyclohexene in FAU: MC and MD

Fluorinated poly(p-terphenyl isatin)-based anion exchange membranes with microphase-separated structures for water electrolysis

Related Author

Xie Zaiku

Liao Zuwei

Wang Chuanming

Teng Jiawei

Zhang Chijin

Ali Hatami

Danial Nasirian

Niloufar Rashidi

Related Institution

State Key Laboratory of Chemical Engineering and Low-Carbon Technology, College of Chemical and Biological Engineering, Zhejiang University

State Key Laboratory of Green Chemical Engineering and Industrial Catalysis, SINOPEC Shanghai Research Institute of Petrochemical Technology Co., Ltd.

Department of Chemical Engineering, Science and Research Branch, Islamic Azad University, Tehran

Department of Chemical Engineering, Shahreza Branch, Islamic Azad University, Isfahan

Department of Chemical Engineering, Tsinghua University

⁰