alkali absorption was experimentally investigated.In the reactor
a plate-wire-plate combination is devised for generating pulsed corona and then alkaline absorbent slurries were introduced into the reactor by a continuous band conveying system to capture the gaseous reaction products.It was found that both SO
2
and NO could be removed by corona combined with
in situ
alkali absorption.The removal of SO
2
increased to 75% with the corona discharge
compared with 60% removal only with Ca(OH)
2
absorption.About 40% removal of NO was reached by pulsed corona combined with
in situ
Ca(OH)
2
absorption.It was found that SO
2
and NO in the gas stream are oxidized to SO
3
and NO
2
by pulsed corona respectively
and then absorbed by the alkali in the reactor.The removals of SO
2
as well as NO were higher with Ca(OH)
2
as the absorbent
compared with using CaCO
3
or ZnO.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.