An Improved Method for Fullerol Preparation Based on Dialysis

姚璐; 康峰; 彭琦云; 杨新林

doi:10.1016/S1004-9541(09)60142-7

Your Location：

Home >

Browse articles >

An Improved Method for Fullerol Preparation Based on Dialysis

Updated：2026-01-06

- An Improved Method for Fullerol Preparation Based on Dialysis
- Chinese Journal of Chemical Engineering Vol. 18, Issue 5, Pages: 876-879(2010)
- Affiliations：
  
  School of Life Science and Technology, Beijing Institute of Technology,Beijing,China,100081
- Author bio：
- Funds：
- DOI：10.1016/S1004-9541(09)60142-7
  CLC：
- Published：2010
- Accepted：
Scan QR Code
YAO Lu, KANG Feng, PENG Qiyun, YANG Xinlin. An Improved Method for Fullerol Preparation Based on Dialysis[J]. , 2010, 18(5): 876-879.
DOI：

YAO Lu, KANG Feng, PENG Qiyun, YANG Xinlin. An Improved Method for Fullerol Preparation Based on Dialysis[J]. , 2010, 18(5): 876-879. DOI： 10.1016/S1004-9541(09)60142-7.

摘要

Abstract

A dialysis-based method was developed to remove Na ions in fullerol preparation by a conventional synthetic route. Fullerol was synthesized using a typical two-phase reaction in the presence of tetrabutylammonium hydroxide. Its structure was confirmed by UV spectra

Fourier transform infrared spectroscopy spectra

H nuclear magnetic resonance

and matrix-assisted laser desorption/ionization time of flight mass spectra. The content of Na element was determined by inductive coupled plasma atomic emission spectroscopy. The mass content of Na in the product obtained from the conventional route was about 10%

and it could be almost completely eliminated by dialysis with a membrane of molecular weight cut-off (MWCO) 8-15 kDa. The yield of fullerol by the dialysis method was slightly higher than by the conventional route. These results indicate that dialysis may have a potential application for fullerol preparation.

关键词

Keywords

references

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Preparation and evaluation of palladium/kieselguhr composites for hydrogen isotope separation

Enhanced corrosion resistance of epoxy resin coating via addition of CeO2 and benzotriazole

Preparation of an adsorptive membrane of polyvinylidene fluoride incorporated functionalized boron nitride nanosheets for arsenic removal

Fluidization thermal decomposition of sodium fluosilicate

Alkyl-tetralin base oils synthesized from coal-based chemicals and evaluation of their lubricating properties

Related Author

Yuting Liu

Manquan Fang

Wenqing Wu

Guanghui Zhang

Guikai Zhang

Xu Han

Ruijie Guo

Baolong Niu

Related Institution

Institute of Materials, China Academy of Engineering Physics

Key Laboratory of Interface Science and Engineering in Advanced Materials, Ministry of Education, Taiyuan University of Technology

College of Materials Science and Engineering, Taiyuan University of Technology

Advanced Membrane Technology Research Centre (AMTEC), Faculty of Chemical and Energy Engineering, Universiti Teknologi Malaysia, Skudai

Radiation Processing Technology Division, Malaysia Nuclear Agency, Bangi, Kajang

⁰