Modeling and Simulation of Production Process on Dimethyl Ether Synthesized from Coal-based Syngas by One-step Method
|Updated:2026-01-06
|
Modeling and Simulation of Production Process on Dimethyl Ether Synthesized from Coal-based Syngas by One-step Method
Chinese Journal of Chemical EngineeringVol. 17, Issue 1, Pages: 108-112(2009)
Affiliations:
1. Engineering Research Center of Large Scale Reactor Engineering and Technology, Ministry of Education, State Key Laboratory of Chemical Engineering, East China University of Science and Technology,Shanghai,China,200237
2. Department of Chemical Engineering, Huaqiao University,Quanzhou,China,362021
HAN Yuanyuan, ZHANG Haitao, YING Weiyong, FANG Dingye. Modeling and Simulation of Production Process on Dimethyl Ether Synthesized from Coal-based Syngas by One-step Method[J]. , 2009, 17(1): 108-112.
DOI:
HAN Yuanyuan, ZHANG Haitao, YING Weiyong, FANG Dingye. Modeling and Simulation of Production Process on Dimethyl Ether Synthesized from Coal-based Syngas by One-step Method[J]. , 2009, 17(1): 108-112.DOI: 10.1016/S1004-9541(09)60041-0.
Modeling and Simulation of Production Process on Dimethyl Ether Synthesized from Coal-based Syngas by One-step Method
has emerged as an important process in chemical engineering field.With the laboratory experiment data about DME synthesis and separation
the production process for DME with high purity is proposed when one-step synthesis of DME in slurry bed reactor from syngas is adopted.On the basis of experimental research and process analysis
the proper unit modules and thermophysical calculation methods for the simulation process are selected.Incorporated the experimentally determined parameters of reaction dynamic model for DME synthesis
regression constants of parameters in non-random two-liquid equation(NRTL) model for binary component in DME separation system with built-in properties model
the process flowsheet is developed and simulated on the Aspen Plus platform.The simulation results coincide well with data obtained in laboratory experiment.Accordingly
the accurate simulation results offer useful references to similar equipment design and process operation optimization.
Abstract
As a result of shortage supply of oil resources
the process for the alternative coal-based fuel
dimethyl ether(DME)
has emerged as an important process in chemical engineering field.With the laboratory experiment data about DME synthesis and separation
the production process for DME with high purity is proposed when one-step synthesis of DME in slurry bed reactor from syngas is adopted.On the basis of experimental research and process analysis
the proper unit modules and thermophysical calculation methods for the simulation process are selected.Incorporated the experimentally determined parameters of reaction dynamic model for DME synthesis
regression constants of parameters in non-random two-liquid equation(NRTL) model for binary component in DME separation system with built-in properties model
the process flowsheet is developed and simulated on the Aspen Plus platform.The simulation results coincide well with data obtained in laboratory experiment.Accordingly
the accurate simulation results offer useful references to similar equipment design and process operation optimization.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.