A Numerical Method on Inverse Determination of Heat Transfer Coefficient Based on Thermographic Temperature Measurement

范春利; 孙丰瑞; 杨立

doi:10.1016/S1004-9541(09)60014-8

Your Location：

Home >

Browse articles >

A Numerical Method on Inverse Determination of Heat Transfer Coefficient Based on Thermographic Temperature Measurement

Updated：2026-01-06

- A Numerical Method on Inverse Determination of Heat Transfer Coefficient Based on Thermographic Temperature Measurement
- Chinese Journal of Chemical Engineering Vol. 16, Issue 6, Pages: 901-908(2008)
- Affiliations：
  
  Department of Power Engineering, Naval University of Engineering,Wuhan,China,430033
- Author bio：
- Funds：
- DOI：10.1016/S1004-9541(09)60014-8
  CLC：
- Published：2008
- Accepted：
Scan QR Code
FAN Chunli, SUN Fengrui, YANG Li. A Numerical Method on Inverse Determination of Heat Transfer Coefficient Based on Thermographic Temperature Measurement[J]. , 2008, 16(6): 901-908.
DOI：

FAN Chunli, SUN Fengrui, YANG Li. A Numerical Method on Inverse Determination of Heat Transfer Coefficient Based on Thermographic Temperature Measurement[J]. , 2008, 16(6): 901-908. DOI： 10.1016/S1004-9541(09)60014-8.

摘要

Abstract

The heat transfer coefficient in a multidimensional heat conduction problem is obtained from the solution of the inverse heat conduction problem based on the thermographic temperature measurement.The modified one-dimensional correction method(MODCM)

along with the finite volume method

is employed for both two-and three-dimensional inverse problems.Aseries of numerical experiments are conducted in order to verify the effectiveness of the method.In addition

the effect of the temperature measurement error

the ending criterion of the iteration

etc

.on the result of the inverse problem is investigated.It is proved that the method is a simple

stable and accurate one that can solve successfully the inverse heat conduction problem.

关键词

Keywords

references

Views

4473

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Modeling and simulation of material distribution in the sequential co-injection molding process

A comprehensive study of two-phase flow and heat transfer of water/Ag nanofluid in an elliptical curved minichannel

Heat transfer model of two-phase flow across tube bundle in submerged combustion vaporizer

Influence of nanoparticle concentrations on flow boiling heat transfer coefficients of Al2O3/R141b in micro heat exchanger by direct metal laser sintering

Heat Transfer in a Liquid-Solid Circulating Fluidized Bed Reactor with Low Surface Tension Media

Related Author

Chuntao Jiang

Youqiong Liu

Qingsheng Liu

Pouyan Talebizadehsardari

Saeid Mir

Ali Marzban

Ghanbarali Sheikhzadeh

Davood Toghraie

Related Institution

School of Mathematics and Statistics, Xinyang Normal University

Department of Mechanical Engineering, Aligoudarz Branch, Islamic Azad University, Aligoudarz

Young Researchers and Elite Club, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr

Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr

Department of Mechanical Engineering, University of Kashan, Kashan

⁰