LI Juan, SHI Yumei, WANG Rongshun. Effect of Working Temperature on the Resistance Characteristic of a Pleated Stainless Steel Woven Filter[J]. , 2009, 17(6): 949-954.
DOI:
LI Juan, SHI Yumei, WANG Rongshun. Effect of Working Temperature on the Resistance Characteristic of a Pleated Stainless Steel Woven Filter[J]. , 2009, 17(6): 949-954.DOI: 10.1016/S1004-9541(08)60301-8.
Effect of Working Temperature on the Resistance Characteristic of a Pleated Stainless Steel Woven Filter
Effect of working temperature on the resistance characteristic including the permeability coefficient and the pressure drop evolution of a pleated stainless steel woven filter with a nominal pore size of 0.5 μm has been studied.The permeability coefficient was obtained based on the pressure drop data and the Darcy's law.In three filtration experiments
pure carbon dioxide at 283 K
nitrogen at 85 K and liquid helium at 18 K are adopted
respectively.It is found that the permeability coefficient decreases at the working temperature due to the cold shrink of the filter element at cryogenic temperature.Then
two kinds of feed slurries
mixture of liquid nitrogen and solid carbon dioxide at 85 K
and mixture of liquid helium and solid nitrogen at 18 K
flow into the filter cell.The solid particles are deposited on the filter surface to form a filter cake and the purified liquid flows through the filter.It is found that the pressure drop evolution shows the same trend on these two temperatures
which can be divided into three stages with high filtration efficiency
indicating the feasibility of the filter for cryogenic application.However
variant cake resistances are obtained
which is resulted from the different interactions between solid particles in the feed slurry at lower working temperature.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Laminar flow of high-viscous non-Newtonian power-law and Bingham fluids in multiple structural bifurcation channel distributors: Flow patterns and pressure drop correlation
Pressure drop and gas holdup in an upward-flow fixed-bed reactor
Pressure drop force due to a non-closely fitting sphere settling along the central line in long rectangular tubes
A general pressure drop model based on liquid holdup of gas-liquid flow in micro-packed beds
Viscous behavior of 1-hexyl-methylimidazolium bis(trifluoromethylsulfonyl)imide/titanium dioxide/polyethylene glycol
Related Author
Weikang Yuan
Ling Zhao
Zhenhao Xi
Wenze Guo
Yuning Zhou
Jie Jiang
Xuesong Wang
Xiaoyi Qiu
Related Institution
State Key Laboratory of Chemical Engineering and Low-Carbon Technology, East China University of Science and Technology
Key Laboratory of Smart Manufacturing in Energy Chemical Process, Ministry of Education, East China University of Science and Technology
Shanghai Key Laboratory of Multiphase Materials Chemical Engineering, East China University of Science and Technology
School of Mechanical and Power Engineering, East China University of Science and Technology