The nanoparticles of the hydrophobic drug of danazol with narrow size distribution are facilely prepared by controlled high-gravity anti-solvent precipitation(HGAP) process.Intensified micromixing and uniform nucleation environment are created by the high-gravity equipment(rotating packed bed) in carrying out the anti-solvent precipitation process to produce nanoparticles.The average particle size decreases from 55 μm of the raw danazol to 190 nm of the nanoparticles.The Brunauer-Emmett-Teller(BET) surface area sharply increases from 0.66 m
2
·g
-1
to 15.08 m
2
·g
-1
.Accordingly
the dissolution rate is greatly improved.The molecular state
chemical composition
and crystal form of the danazol nanoparticles remains unchanged after processing according to Fourier transform infrared(FTIR) and X-ray diffraction(XRD).The high recovery ratio and continuous production capacity are highly appreciated in industry.Therefore
the HGAP method might offer a general and facile platform for mass production of hydrophobic pharmaceutical danazol particles in nanometer range.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Synthesis of chemiluminescent carbonized polymer dots under atmospheric conditions for multimode luminescence anti-counterfeiting
Enhanced mass transfer in flexible electrodes of open-pore cobalt disulfide nanosheets supported on sulfur-doped carbon fibers for efficient zinc-air batteries
The carbon capture performance of phase change absorbent based on nanoparticle enhancement
Copper hexacyanoferrate framework with dual redox centers for selective lithium extraction in hybrid capacitive deionization
State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology
Research Center of the Ministry of Education for High Gravity Engineering and Technology, Beijing University of Chemical Technology
Quzhou Innovation Institute for Chemical Engineering and Materials
School of Chemistry and Chemical Engineering, Guangxi University
Center of Energy Storage Materials & Technology, College of Engineering and Applied Sciences, Jiangsu Key Laboratory of Artificial Functional Materials, National Laboratory of Solid State Microstructures and Collaborative Innovation Center of Advanced Microstructures, Nanjing University