Design and Performance Analysis of Micro Proton Exchange Membrane Fuel Cells

钟振忠; 陈俊勋; 彭荣贵

doi:10.1016/S1004-9541(08)60208-6

Your Location：

Home >

Browse articles >

Design and Performance Analysis of Micro Proton Exchange Membrane Fuel Cells

Updated：2026-01-06

- Design and Performance Analysis of Micro Proton Exchange Membrane Fuel Cells
- Chinese Journal of Chemical Engineering Vol. 17, Issue 2, Pages: 298-303(2009)
- Affiliations：
  
  Department of Mechanical Engineering, National Chiao Tung University, Hsinchu,China,300
- Author bio：
- Funds：
- DOI：10.1016/S1004-9541(08)60208-6
  CLC：
- Published：2009
- Accepted：
Scan QR Code
ZHONG Zhenzhong, CHEN Junxun, PENG Ronggui. Design and Performance Analysis of Micro Proton Exchange Membrane Fuel Cells[J]. , 2009, 17(2): 298-303.
DOI：

ZHONG Zhenzhong, CHEN Junxun, PENG Ronggui. Design and Performance Analysis of Micro Proton Exchange Membrane Fuel Cells[J]. , 2009, 17(2): 298-303. DOI： 10.1016/S1004-9541(08)60208-6.

摘要

Abstract

This study describes a novel micro proton exchange membrane fuel cell(PEMFC)(active area

2.5 cm

).The flow field plate is manufactured by applying micro-electromechanical systems(MEMS) technology to silicon substrates to etch flow channels without a gold-coating.Therefore

this investigation used MEMS technology for fabrication of a flow field plate and presents a novel fabrication procedure.Various operating parameters

such as fuel temperature and fuel stoichiometric flow rate

are tested to optimize micro PEMFC performance.A single micro PEMFC using MEMS technology reveals the ideal performance of the proposed fuel cell.The optimal power density approaches 232.75 mW·cm

-1

when the fuel cell is operated at ambient condition with humidified

heated fuel.

关键词

Keywords

references

Views

117

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Dual-site engineering of Ga-modified HZSM-5 towards efficient propane aromatization

Mechanochemical preparation and properties of B-N doped carbon materials based on calcium carbide

CFD-PBM simulation of liquid-liquid dispersions in an industrial pulsed disc and doughnut column with directly measured breakup and coalescence kernels

Fluorinated poly(p-terphenyl isatin)-based anion exchange membranes with microphase-separated structures for water electrolysis

Synergistically coupling of vertically oriented Ru/Co co-doped MoS2 with interfacial engineering for efficient electrochemical hydrogen evolution

Related Author

No data

Related Institution

No data

⁰