The Enrichment of Chloride Anion in the Occluded Cell and Its Effect on Stress Corrosion Crack of 304 Stainless Steel in Low Chloride Concentration Solution
|Updated:2026-01-06
|
The Enrichment of Chloride Anion in the Occluded Cell and Its Effect on Stress Corrosion Crack of 304 Stainless Steel in Low Chloride Concentration Solution
Chinese Journal of Chemical EngineeringVol. 16, Issue 4, Pages: 646-649(2008)
Affiliations:
1. College of Materials Science and Engineering, Beijing University of Chemical Technology,Beijing,China,100029
2. College of Chemical Engineering, Shandong University of Technology,Zibo,China,255049
3. Department of Chemical, Biomedical, and Materials Engineering, Stevens Institute of Technology, Hoboken, New Jersey,USA,07030
L Guocheng, XU Chunchun, L Yimin, CHENG Haidong, HE Zonghu. The Enrichment of Chloride Anion in the Occluded Cell and Its Effect on Stress Corrosion Crack of 304 Stainless Steel in Low Chloride Concentration Solution[J]. , 2008, 16(4): 646-649.
DOI:
L Guocheng, XU Chunchun, L Yimin, CHENG Haidong, HE Zonghu. The Enrichment of Chloride Anion in the Occluded Cell and Its Effect on Stress Corrosion Crack of 304 Stainless Steel in Low Chloride Concentration Solution[J]. , 2008, 16(4): 646-649.DOI: 10.1016/S1004-9541(08)60135-4.
The Enrichment of Chloride Anion in the Occluded Cell and Its Effect on Stress Corrosion Crack of 304 Stainless Steel in Low Chloride Concentration Solution
The enrichment of chloride anion within the occluded cell (OC) for Type 304 austenitic stainless steel in low chloride concentration solution has been investigated by means of a simulated OC. The influence of the enrichment of chloride anion on stress corrosion crack (SCC) of Type 304 stainless steel has been studied. It was observed that the amount of chloride anion migration was proportional to the charge flowing through the anode. Owning to the effects of enrichment of chloride anion
low chloride concentration solution could induce SCC for Type 304 stainless steel.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Mechanochemical preparation and properties of B-N doped carbon materials based on calcium carbide
Optimizing energy efficiency in fluid catalytic cracking units with GA and NSGA-II: A comprehensive simulation and multi-factor analysis
Enhanced mass transfer in flexible electrodes of open-pore cobalt disulfide nanosheets supported on sulfur-doped carbon fibers for efficient zinc-air batteries
Revealing critical factors in lignite-water interactions: From atomic to macroscopic
CFD-PBM simulation of liquid-liquid dispersions in an industrial pulsed disc and doughnut column with directly measured breakup and coalescence kernels