Facile modification of aluminum hypophosphate and its flame retardancy for polystyrene

Wensheng Li; Liangyuan Qi; Daolin Ye; Wei Cai; Weiyi Xing

Your Location：

Home >

Browse articles >

Facile modification of aluminum hypophosphate and its flame retardancy for polystyrene

Full Length Article | Updated：2026-01-06

- Facile modification of aluminum hypophosphate and its flame retardancy for polystyrene
- Chinese Journal of Chemical Engineering Vol. 60, Issue 8, Pages: 90-98(2023)
- Affiliations：
  
  1. State Key Laboratory of Fire Science, University of Science and Technology of China,Hefei,China,230026
  2. Nano Science and Technology Institute, University of Science and Technology of China,Suzhou,China,215123
  3. Suzhou Key Laboratory of Urban Public Safety, Suzhou Institute for Advanced Study, University of Science and Technology of China,Suzhou,China,215000
- Author bio：
- Funds：
- DOI：
  CLC：
- Published：2023
- Accepted：
Scan QR Code
Wensheng Li, Liangyuan Qi, Daolin Ye, Wei Cai, Weiyi Xing. Facile modification of aluminum hypophosphate and its flame retardancy for polystyrene[J]. Chinese Journal of Chemical Engineering, 2023, 60(8): 90-98.
DOI：

Wensheng Li, Liangyuan Qi, Daolin Ye, Wei Cai, Weiyi Xing. Facile modification of aluminum hypophosphate and its flame retardancy for polystyrene[J]. Chinese Journal of Chemical Engineering, 2023, 60(8): 90-98. DOI：

摘要

Abstract

A phosphorus-containing flame retardant

aluminum hypophosphite (AHPi)

has been modified by (3-aminopropyl) triethoxysilane (KH550) to prepare flame-retardant polystyrene (PS). The influence of modified AHPi on the morphology and characterization was investigated

and differences in flame retardant properties of the PS/AHPi and PS/modified AHPi were compared. The PS composite can pass the vertical burning tests (UL-94 standard) with a V-0 rating when the mass content of modified AHPi reaches 20%

compared with the mass content of 25% AHPi. The element mapping of the PS composite shows that modified AHPi has better dispersion in PS than AHPi. Thermogravimetric analysis results indicated that adding modified AHPi can advance the initial decomposition temperature of the composite material. With the addition of modified AHPi

the decrease in peak heat release rate (pHRR) is more evident than AHPi

and the char yield of the resultant PS composites gradually increased. With the addition of 25% modified AHPi

the pHRR and total heat release of PS composites decreased by 81.4% and 37.6%. The modification of AHPi promoted its dispersion in the PS matrix and improved the char formation of PS composites. The results of real-time infrared spectrometry of PS composites

Fourier transform infrared spectra and X-ray photoelectron analysis of the char layer indicated that modified AHPi has flame retardancy in condensed and gas phases.

关键词

Keywords

references

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Controllable synthesis of Ni3S2/V3S4@NF-xF(x=0, 4, 8) catalysts for efficient hydrogen production in seawater and urea electrolyte

Multi-dimensional key performance indicators construction methodology for the process safety management

From data to insight: Building a knowledge graph for risk analysis of hazardous chemical accidents

Quality related fault detection based on dynamic-inner convolutional autoencoder and partial least squares and its application to ironmaking process

MXene-supported dense cobalt phosphide nanoparticles as cathode for enhanced cycle stability in lithium-sulfur batteries

Related Author

Wen Wei

Meng Xiangyu

Liu Min

Du Xiaoqiang

Zhang Xiaoshuang

Gao Zihan

Zhao Dongfeng

Zhang Fuqun

Related Institution

Department of Chemistry, Xinzhou Normal University

Henan Provincial Key Laboratory of Nanocomposites and Applications, Institute of Nanostructured Functional Materials, Huanghe Science and Technology College

School of Chemistry and Chemical Engineering, North University of China

School of Environment and Safety Engineering, North University of China

College of Mechanical and Electrical Engineering, China University of Petroleum (East China)

⁰