How to achieve uniform mixing of highly viscous fluids with low energy consumption is a major industry demand and one of the hot spots of mixing research. A typical multistage rotor-stator mixer (MRSM) equipped with a distributor was investigated to disclose the effects on the mixing performance and power consumption for highly viscous fluids

via

numerical simulation

considering the influence factors associated with different geometric parameters of both MRSM and the distributor. The mixing index and power consumption are used to evaluate the performance of the mixers. The dimensionless correlations for the mixing index and the power consumption are established considering the factors including the flow rate

rotor speed

the number of mixing units. Adopting the optimized mixer with the distributor (X1-T1)

the mixing index increases to 0.85 (obviously higher than 0.46 for the mixer T1 without a distributor)

meanwhile the corresponding power consumption is about 1/5 of that of T1 achieving the same mixing effect. It illustrates that the distributor can significantly improve the mixing of highly viscous fluids in the MRSM without the cost of large power consumption. These results would provide a guidance on

the design and optimization of multistage rotor-stator mixers in industrial applications.