Comparative study of different hydro-dynamic flow in microbial fuel cell stacks

Suransh Jain; Arvind Kumar Mungray

Your Location：

Home >

Browse articles >

Comparative study of different hydro-dynamic flow in microbial fuel cell stacks

Energy, Resources and Environmental Technology | Updated：2026-01-06

- Comparative study of different hydro-dynamic flow in microbial fuel cell stacks
- Chinese Journal of Chemical Engineering Vol. 32, Issue 4, Pages: 423-430(2021)
- Affiliations：
  
  Chemical Engineering Department, Sardar Vallabhbhai National Institute of Technology, Surat,India,395007
- Author bio：
- Funds：
- DOI：
  CLC：
- Published：2021
- Accepted：
Scan QR Code
Suransh Jain, Arvind Kumar Mungray. Comparative study of different hydro-dynamic flow in microbial fuel cell stacks[J]. Chinese Journal of Chemical Engineering, 2021, 32(4): 423-430.
DOI：

Suransh Jain, Arvind Kumar Mungray. Comparative study of different hydro-dynamic flow in microbial fuel cell stacks[J]. Chinese Journal of Chemical Engineering, 2021, 32(4): 423-430. DOI：

摘要

Abstract

This work has investigated the scale-up potential of microbial fuel cells (MFCs) under stacking mode. Stacking was done in batch mode and continuous mode. Batch feeding mode stacks were operated in electrical series (S) and parallel (P) mode. Continuous feeding mode stacks were kept in electrically parallel mode with different hydro-dynamic patterns. The two continuous stacks were connected hydrodynamically in series (

i.e

. Parallel Dependent; PD) and parallel (

i.e

. Parallel Independent; PID) configurations. The performance of the continuous stacks was evaluated on the basis of COD consumption rate

power generation and coulombic efficiency. PID obtained highest power (0.47 mW) which was approximately 3.6 times that of PD configuration (0.13 mW). The rate of COD consumption was also highest in PID stack (3091.75 mg·L

-1

·d

-1

). Coulombic efficiency of the PID stack was 14.26% which was approximately 292.8% of the PD stack. The results confirmed that the parallel electrical connection hybridized with the independent hydro-dynamic flow gives the best possible results when working with stacking of MFCs.

关键词

Keywords

references

Views

341

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Synthesis of waterborne polyurethane-humic acid cross-linked biomass porous materials for the adsorption of methylene blue

Removal of phenol via regulation of surface hybridization structure of activated carbon catalysts for persulfacte activation

Enhancing wastewater treatment efficiency with stereoscopic hydrogel evaporators and renewable energy integration for sustainability

Efficient and rapid capture of uranium(VI) in wastewater via multi-amine modified β-cyclodextrin porous polymer

Photoinduced transposed Paternò-Büchi reaction for effective synthesis of high-performance jet fuel

Related Author

Shanghong Ma

Jianbo Qu

Haitao Zhang

Xiubin Cui

Peng Ye

Qingfei Hu

Mingzhen Chao

Xiao Liang

Related Institution

State Key Laboratory of Biobased Material and Green Papermaking, Qilu University of Technology, Shandong Academy of Sciences

Faculty of Light Industry, Qilu University of Technology, Shandong Academy of Sciences

Xiangjiang Laboratory

Zhejiang Key Laboratory of Surface and Interface Science and Engineering for Catalysts, College of Chemical Engineering, Zhejiang University of Technology

Engineering Training Centre, Nanjing Polytechnic Institute

⁰