Fabrication of a highly efficient new nanocomposite polymer gel for controlling the excess water production in petroleum reservoirs and increasing the performance of enhanced oil recovery processes

Sajad Asadizadeh; Shahab Ayatollahi; Bahman ZareNezhad

Your Location：

Home >

Browse articles >

Fabrication of a highly efficient new nanocomposite polymer gel for controlling the excess water production in petroleum reservoirs and increasing the performance of enhanced oil recovery processes

Energy, Resources and Environmental Technology | Updated：2026-01-06

- Fabrication of a highly efficient new nanocomposite polymer gel for controlling the excess water production in petroleum reservoirs and increasing the performance of enhanced oil recovery processes
- Chinese Journal of Chemical Engineering Vol. 32, Issue 4, Pages: 385-392(2021)
- Affiliations：
  
  1. Faculty of Chemical, Petroleum and Gas Engineering, Semnan University, Semnan,Iran
  2. Chemical and Petroleum Engineering Department, Sharif University of Technology, Tehran,Iran
- Author bio：
- Funds：
- DOI：
  CLC：
- Published：2021
- Accepted：
Scan QR Code
Sajad Asadizadeh, Shahab Ayatollahi, Bahman ZareNezhad. Fabrication of a highly efficient new nanocomposite polymer gel for controlling the excess water production in petroleum reservoirs and increasing the performance of enhanced oil recovery processes[J]. Chinese Journal of Chemical Engineering, 2021, 32(4): 385-392.
DOI：

Sajad Asadizadeh, Shahab Ayatollahi, Bahman ZareNezhad. Fabrication of a highly efficient new nanocomposite polymer gel for controlling the excess water production in petroleum reservoirs and increasing the performance of enhanced oil recovery processes[J]. Chinese Journal of Chemical Engineering, 2021, 32(4): 385-392. DOI：

摘要

Abstract

A new nanocomposite polymer gel is synthesized for reduction of excess water production in petroleum reservoirs at real operating conditions. This new nanocomposite gel contains SiO

nanoparticles

partially hydrolyzed polyacrylamide (HPAM) and chromium triacetate. High pressure and high temperature tests using porous carbonate core are carried out to evaluate the effects of nanoparticles on the synthesized polymer gel performance. It is shown that the residual resistance factor ratio of water to oil using the synthesized polymer gel nanocomposite in this work is much higher than that of the ordinary polymer gels. The presented results confirm the high performance of the synthesized nanocomposite polymer gel for decreasing the water flow through porous carbonate bed. A mathematical model for description of oil and water flow behavior in the presence of synthesized nanocomposite polymer gel is also presented. The presented nano polymer gel leads to considerable cost saving in enhanced oil recovery (EOR) processes.

关键词

Keywords

references

Views

207

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Effect of carbon modifications on the performance of hydrogenation catalysts

Hierarchical framework for predictive maintenance of coking risk in fluid catalytic cracking units: A data and knowledge-driven method

Mechanochemical synthesis of Ag/TiO2@PANI nanocomposites for enhanced toluene photocatalytic degradation under near-ultraviolet light

In situ modification of heavy oil catalyzed by nanosized metal-organic framework at mild temperature and its mechanism

A deep reinforcement learning approach to gasoline blending real-time optimization under uncertainty

Related Author

Zhenhui Lv

Jianan Li

Tao Yang

Yibao Li

Chong Peng

Nan Liu

Chunmeng Zhu

Zeng Li

Related Institution

Key Laboratory of Organo-Pharmaceutical Chemistry, Gannan Normal University

Dalian Research Institute of Petroleum and Petrochemicals, SINOPEC

State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology

College of Artificial Intelligence, China University of Petroleum (Beijing)

State Key Laboratory of Heavy Oil Processing, China University of Petroleum (Beijing)

⁰