is popular for its high energy density (697 W·h·kg
-1
) and safety. When LiMnPO
4
crystal grows
the potential barrier along b and c axis is strong
which makes the crystal grow along b axis to form a one-dimensional chain structure. However
the main migration channel of lithium ions in olivine structure is plane (0 1 0). By shortening the growth in the direction of b axis and enhancing the diffusion along the directions of a and c
two-dimensional nanosheets that are more conducive to the migration of lithium ions are formed. The dosage of polyols is the key factor guiding the dispersion of the crystals to the (0 1 0) plane. X-ray diffraction (XRD)
Scanning electron microscopy (SEM)
transmission electron microscopy (TEM) and other means are used to characterize the samples. After experiments
we found that when the ratio of polyol/water was 2:1
the morphology of the synthesized sample was 20-30 nm thick nanosheets
which had the best electrochemical performance. At 0.1C
the discharge specific capacity reaches 148.9 mA·h·g
-1
still reaches 144.3 mA·h·g
-1
at the 50th cycle
. and there is still 112.5 mA·h·g
-1
under high rate (5C). This is thanks to the good dispersion of the material in the direction of the crystal plane (0 1 0). This can solve the problem of low conductivity and ionic mobility of phosphate materials.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Integrating electrochemical and thermal models for improved lithium-ion battery energy storage system heat dissipation
The preparation of SnS2@NxC electrodes and its exceptional performance in energy storage usages
A cellular automata framework for porous electrode reconstruction and reaction-diffusion simulation
Growth kinetics of hydrate formation from water–hydrocarbon system
Dissolution-regrowth synthesis of SiO2 nanoplates and embedment into two carbon shells for enhanced lithium-ion storage
Related Author
Honglai Liu
Cheng Lian
Jianglong Du
Yiting Lin
Wenqi Yang
Yunfei Song
Zhen He
Yuqian Wei
Related Institution
State Key Laboratory of Chemical Engineering and Low-Carbon Technology, School of Chemical Engineering, East China University of Science and Technology
School of Mechanical and Power Engineering, East China University of Science and Technology
State Key Laboratory of Chemical Engineering and Low-Caron Technology, School of Chemistry and Molecular Engineering, East China University of Science and Technology
School of Materials Science and Engineering, Jiangsu University of Science and Technology
School of Engineering, University of Waikato, Hamilton 3216, New Zealand