CaO based sorbents have great potential for commercial use to capture CO
2
of power plants. In the demand of producing sorbents with better cyclic performance
CaO-based sorbents derived from different kinds of calcium precursors
containing calcium carbonate (CC-CaO)
calcium gluconate monohydrate (CG-CaO)
calcium citrate (CCi-CaO) and calcium acetate monohydrate (CA-CaO)
were tested cyclically and compared using simultaneous thermal analyzer (STA). And further study was conducted on the sorbents modified with citric acid monohydrate and 50% gluconic acid solution by wet mixing combustion synthesis. The modified sorbents showed better performance and higher pore parameters as well as porous microstructure with more organic acid added. After 20 cycles of carbonation and calcination
the C2CCi8 (CaO:citric acid=2:8 by mass ratio) and C2G8 (CaO:gluconic acid=2:8 by mass ratio) sorbent possess CO
2
capture capacity of 0.45 g·g
-1
(g CO
2
per g sorbents) and 0.52 g·g
-1
respectively. The citric acid was more effective for modification than gluconic acid for extended 50 cycles. Furthermore
good linear relationship
between CaO conversion and specific surface area as well as pore volume were determined
of which the specific surface area showed closer correlation with CaO conversion.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.