Kinetic degradation of amoxicillin by using the electro-Fenton process in the presence of a graphite rods from used batteries

Hakima Kadji; Idris Yahiaoui; Zehira Garti; Abdeltif Amrane; Farida Aissani-Benissad

Your Location：

Home >

Browse articles >

Kinetic degradation of amoxicillin by using the electro-Fenton process in the presence of a graphite rods from used batteries

Catalysis, Kinetics and Reaction Engineering | Updated：2026-01-06

- Kinetic degradation of amoxicillin by using the electro-Fenton process in the presence of a graphite rods from used batteries
- Chinese Journal of Chemical Engineering Vol. 32, Issue 4, Pages: 183-190(2021)
- Affiliations：
  
  1. Laboratoire de Génie de l'Environnement(LGE), Faculté de Technologie, Université de Bejaia,Bejaia,Algeria,06000
  2. Ecole Nationale Supérieure de Chimie de Rennes, Université Rennes1, CNRS, UMR 6226, 11 allée de Beaulieu,CS,France,50837
- Author bio：
- Funds：
- DOI：
  CLC：
- Published：2021
- Accepted：
Scan QR Code
Hakima Kadji, Idris Yahiaoui, Zehira Garti, Abdeltif Amrane, Farida Aissani-Benissad. Kinetic degradation of amoxicillin by using the electro-Fenton process in the presence of a graphite rods from used batteries[J]. Chinese Journal of Chemical Engineering, 2021, 32(4): 183-190.
DOI：

Hakima Kadji, Idris Yahiaoui, Zehira Garti, Abdeltif Amrane, Farida Aissani-Benissad. Kinetic degradation of amoxicillin by using the electro-Fenton process in the presence of a graphite rods from used batteries[J]. Chinese Journal of Chemical Engineering, 2021, 32(4): 183-190. DOI：

摘要

Abstract

This study reports the removal of amoxicillin (AMX) in aqueous media using the electro-Fenton process in the presence of a graphite cathode recovered from used batteries. The impact of the relevant parameters on the electro-Fenton process

namely the applied current intensity

the temperature

the initial concentration of AMX and the initial concentration of ferrous ions were investigated. The results showed that the optimal values were:

=600 mA

=25℃

[AMX

]

=0.082 mmol·L

-1

and[Fe

]

=1 mmol·L

-1

leading to 95% degradation and 74% mineralization. The model parameters of AMX mineralization were determined using nonlinear methods

showing that it follows a pseudo-second-order kinetic. The Energy consumption (EC) calculated under the optimal values was found to be 0.79 kW·h·g

-1

which was of the same order of magnitude of those reported in other findings; while it is noteworthy that the electrodes used in our study are of a lower cost.

关键词

Keywords

references

Views

341

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Microfluidic extraction of phenolic compounds from wastewater in the straight/helical/in-plane spiral microchannels

Three-dimensional porous bimetallic metal–organic framework/gelatin aerogels: A readily recyclable peroxymonosulfate activator for efficient and continuous organic dye removal

Mechanism study of Cu(II) adsorption from acidic wastewater by ultrasonic-modified municipal solid waste incineration fly ash

Waste acid recovery utilizing monovalent cation permselective membranes through selective electrodialysis

Flexibility analysis for continuous ibuprofen manufacturing processes

Related Author

Qi Yabing

Zhao Chumeng

Wenlong Xiang

Xian Zhang

Rou Xiao

Yanhui Zhang

Shunda lin

Yang Lu

Related Institution

School of Chemistry and Chemical Engineering, Xi'an University of Architecture and Technology

Fujian Provincial University Key Laboratory of Pollution Monitoring and Control, Minnan Normal University

College of Chemistry, Chemical Engineering and Environment, Fujian Province Key Laboratory of Morden Analytical Science and Separation Technology, Minnan Normal University

Hangzhou Xiaoshan Jinjiang Green Energy Co., Ltd., Xiaoshan

Zhejiang University Qingshanhu Energy Research Center

⁰