A numerical study of accelerated moderate or intense low-oxygen dilution (MILD) combustion stability for methane in a lab-scale furnace by off-stoichiometric combustion technology
Fluid Dynamics and Transport Phenomena|Updated:2026-01-06
|
A numerical study of accelerated moderate or intense low-oxygen dilution (MILD) combustion stability for methane in a lab-scale furnace by off-stoichiometric combustion technology
Chinese Journal of Chemical EngineeringVol. 32, Issue 4, Pages: 108-118(2021)
Affiliations:
1. The State Key Laboratory of Refractories and Metallurgy, Wuhan University of Science and Technology,Wuhan,China,430081
2. Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education, Wuhan University of Science and Technology,Wuhan,China,430081
3. School of Energy and Power Engineering, Huazhong University of Science and Technology,Wuhan,China,430074
Author bio:
Funds:
DOI:
CLC:
Published:2021
Accepted:
Scan QR Code
Mengqian Xie, Fangqin Dai, Yaojie Tu. A numerical study of accelerated moderate or intense low-oxygen dilution (MILD) combustion stability for methane in a lab-scale furnace by off-stoichiometric combustion technology[J]. Chinese Journal of Chemical Engineering, 2021, 32(4): 108-118.
DOI:
Mengqian Xie, Fangqin Dai, Yaojie Tu. A numerical study of accelerated moderate or intense low-oxygen dilution (MILD) combustion stability for methane in a lab-scale furnace by off-stoichiometric combustion technology[J]. Chinese Journal of Chemical Engineering, 2021, 32(4): 108-118.DOI:
A numerical study of accelerated moderate or intense low-oxygen dilution (MILD) combustion stability for methane in a lab-scale furnace by off-stoichiometric combustion technology
Moderate or intense low-oxygen dilution (MILD) combustion has become a promising low-NO
X
emission technology
while the delayed mixing of reactants and slower oxidation rate could potentially cause ignition instability in some scenarios. This paper proposes a new idea for enhancing the ignition stability for methane MILD combustion by combining with off-stoichiometric combustion (OSC)
and its performances have been numerically assessed through a comparison against the original MILD combustion burner. The results reveal although non-premixed pattern has the lowest NO emission
it suffers from a larger liftoff distance
thus less ignition stability. Contrarily
both partially-premixed and fully premixed patterns exhibit excellent ignition stability. Among the considered OSC conditions
the pattern of Inner ultra-rich and Outer lean produces the lowest NO emission while maintains a high ignition stability. Furthermore
the enhancement of the combustion stability by implementing OSC to the original MILD combustion burner is shown by comparing the operational range of furnace wall temperat
ure (
T
f
)
CO and NO emissions
as well as the evolution of chemical flame. The comparison reveals that OSC can extend the lowest operational
T
f
from 900 K to 800 K. More importantly
OSC can significantly improve the ignition stability in the whole range of
T
f
as compared to the original MILD combustion burner.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Biochar as a structure-tunable stationary phase for column chromatographic fractionation of bio-oil
COS generation behavior during desulfurization for H2S over zeolite in simulated blast furnace gas
Dual-site engineering of Ga-modified HZSM-5 towards efficient propane aromatization
Synergistic Ba/Na promotion of BaFe2O4-derived catalysts for enhanced CO2 hydrogenation to light olefins
A durable fluorine-free polyurethane-coated fabric with switchable super-wetting properties under mild pH conditions for controllable oil/water separation