Spongy acetylenic carbon material prepared by ball milling CaC<sub>2</sub> and chlorinated rubber-Its mercury adsorption and electrochemical property

Xuebing Xu; Wenfeng Li; Luyan Xia; Yingzhou Lu; Hong Meng; Chunxi Li

Your Location：

Home >

Browse articles >

Spongy acetylenic carbon material prepared by ball milling CaC₂ and chlorinated rubber-Its mercury adsorption and electrochemical property

Materials and Product Engineering | Updated：2026-01-06

- Spongy acetylenic carbon material prepared by ball milling CaC₂ and chlorinated rubber-Its mercury adsorption and electrochemical property
- Chinese Journal of Chemical Engineering Vol. 27, Issue 8, Pages: 1988-1995(2019)
- Affiliations：
  
  1. State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology,Beijing,China,100029
  2. College of Chemical Engineering, Beijing University of Chemical Technology,Beijing,China,100029
  3. Beijing Key Laboratory of Energy Environmental Catalysis, Beijing University of Chemical Technology,Beijing,China,100029
- Author bio：
- Funds：
- DOI：
  CLC：
- Published：2019
- Accepted：
Scan QR Code
and chlorinated rubber-Its mercury adsorption and electrochemical property[J]. 中国化学工程学报, 2019, 27(8): 1988-1995.
DOI：

and chlorinated rubber-Its mercury adsorption and electrochemical property[J]. 中国化学工程学报, 2019, 27(8): 1988-1995. DOI：

摘要

Abstract

Design and preparation of novel advanced carbon materials with unique architecture and functional groups is of great significance. Herein

a spongy acetylenic carbon material (SACM) was prepared through mechanochemical reaction of CaC

and chlorinated rubber in a planetary ball mill at ambient temperature. Its composition and structure were characterized

and its electrochemical properties and adsorption performance for Hg

were studied. The SACM is composed of submicron spongy aggregates with high carbon content (81.8%) and specific area (503.9 m

·g

-1

)

rich porosity and acetylenic groups. The SACM exhibits excellent adsorption for Hg

with saturated adsorption amount being 157.1 mg·g

-1

which is superior to conventional carbon materials. Further

it exhibits good electrochemical performance with low equivalent series resistance (0.50 Ω)

excellent cycling stability and ideal double layer capacitive behavior. This paper provides a novel and universal synthesis method of spongy carbon materials

and better results can be expected through tuning the pore structure

graphitizat

ion degree

and heteroatoms of the target carbon materials.

关键词

Keywords

references

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Mechanochemical preparation and properties of B-N doped carbon materials based on calcium carbide

Life cycle assessment of HFC-134a production by calcium carbide acetylene route in China

Synthesis of activated carbons from black sapote seeds, characterization and application in the elimination of heavy metals and textile dyes

COS generation behavior during desulfurization for H2S over zeolite in simulated blast furnace gas

Enhanced plasma-catalytic steam reforming of methane to methanol on a hydrophobically modified Cu/silicalite-1 catalyst

Related Author

Lu Yingzhou

Meng Hong

Li Chunxi

Song Hongyan

Su Zihao

Li Zongying

Boyang Bai

Xiaoxun Ma

Related Institution

State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources, Xinjiang University

College of Chemistry, Beijing University of Chemical Technology

State Key Laboratory of Chemical Resource Engineering

School of Chemical Engineering, Northwest University

Chemical Engineering Research Center of the Ministry of Education (MOE) for Advanced Use Technology of Shanbei Energy

⁰

Spongy acetylenic carbon material prepared by ball milling CaC2 and chlorinated rubber-Its mercury adsorption and electrochemical property

DOI：

摘要

Abstract

关键词

Keywords

references

Spongy acetylenic carbon material prepared by ball milling CaC₂ and chlorinated rubber-Its mercury adsorption and electrochemical property