Crystalline phase is the key factor for catalyst activity. The zirconium modified PCs/γ-Al
2
O
3
samples were prepared through a simple step incipient-wetness impregnation method. The raw materials and samples were characterized by thermogravimetric-differential analysis (TG-DTA)
X-ray diffraction (XRD)
Fourier transform infrared spectroscopy (FT-IR)
temperature-programmed desorption of ammonia and carbon dioxide (NH
3
-and CO
2
-TPD). The effects of calcination temperature and zirconium content on structure
chemical transformation
and acidity-basicity were investigated. Calcination temperature exhibited the major effect on the crystalline phase of samples. The new phase of Al0
.1
Zr
0.9
O
1.95
was exhibited which was above 650℃. In addition
zirconium content was influenced by the acidic and basic properties of the surface. The acidity and basicity of the ZrPCs/γ-Al
2
O
3
sample increased with the increasing of zirconium content.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Surface and structure characteristics of commercial K-Feldspar powders: Effects of temperature and leaching media
Oxidative desulfurization of dibenzothiophene over Fe promoted Co-Mo/Al2O3 and Ni-Mo/Al2O3 catalysts using hydrogen peroxide and formic acid as oxidants
Heavy metals adsorption by banana peels micro-powder: Equilibrium modeling by non-linear models
Preparation and characterization of monodisperse zirconia spherical nanometer powder via lamellar liquid crystal template method
Synthesis and characterization of poppy seed oil methyl esters
Related Author
Ali Azizi
Behnam Abdolalipour
Ali Motei Dizaji
Aidin Bordbar-Khiabani
Tohid Joodi
Hamed Salimkhani
Haroon Ur Rashid
Yaseen Muhammad
Related Institution
Department of Materials Engineering, University of Tabriz, P. O. Box 151666-1647, Tabriz
Department of Nanotechnology and Advanced Materials, Materials and Energy Research Center, P. O. Box 14155-4777, Tehran
Department of Mining and Metallurgy, Amirkabir University of Technology, P. O. Box 159163-4311, Tehran
2 School of Chemistry and Chemical Engineering, Key Laboratory of Petrochemical Resource Processing and Process Intensification Technology, Guangxi University
3 Department of Chemistry, Sarhad University of Science and Information Technology