Due to the high price and formation damage of the guargum fracturing fluid
many oilfields are more and more interested in surfactant based fracturing fluids. The rheological properties of erucicamide dimethyl amidopropyl betaine (EDAB)-HCl acid blended system and its suitability as fracturing fluid were investigated in this work. The effects of pH
concentration of EDAB
and temperature on the rheological properties of the blended system were studied. The results show that addition of EDAB improved the viscosity of the system from less than 10 mPa·s to about 400 mPa·s
which could retard the acid-rock reaction to about one half at 60℃ and one quarter at 90℃ comparing to straight HCl acid
suggesting that there is sufficient time for the blended fluid to react with formation rock when it is used as fracturing fluid in an oil field. Core flow tests demonstrated that the EDAB-acid blended fluid could divert itself from high permeability formation core to low permeability one
thus ensuring proper acid placement in the target reservoirs.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Study on the effect of modified magnetic nanoparticles Co3O4@HPAM monomer ratio on viscosity reduction of thick oil emulsification
Variable pseudo-particle modeling for molecular dynamics simulation
Nano-silica greases based on alkylnaphthalene base oils with various side chain and their rheological behaviors and tribological properties
Surfactant-mediated microwave synthesis of metal organic frameworks for efficient atmospheric water harvesting
Experimental and computational insight in thermodynamic properties of binary mixtures of acetonitrile with trichloroethene or tetrachloroethene at different temperatures
Related Author
Sun Nana
Dong Hongmei
Liu Jian
Hu Jianbo
Qiu Tianhao
Zhao Mingcan
Li Chengxiang
Zhang Yaning
Related Institution
School of Pipeline Engineering, Xi'an Shiyou University
School of Chemical Engineering, University of Chinese Academy of Sciences
State Key Laboratory of Mesoscience and Engineering, Institute of Process Engineering, Chinese Academy of Sciences
School of Energy Science and Engineering, Harbin Institute of Technology