Characterization of dynamic behavior in the liquid spray zone of a bottom-spouted fluidized bed

Sun Chengbin; Wang Meng; Zhan Dekang; Guo Tuo; Wu Mingzhou; Wu Man; Guo Qingjie

doi:null

Your Location：

Home >

Browse articles >

Characterization of dynamic behavior in the liquid spray zone of a bottom-spouted fluidized bed

Updated：2026-09-17

- Characterization of dynamic behavior in the liquid spray zone of a bottom-spouted fluidized bed
- Characterization of dynamic behavior in the liquid spray zone of a bottom-spouted fluidized bed
- 中国化学工程学报（英文） 2026年95卷第7期页码：194-206
- Affiliations：
  
  Laboratory of Green & Smart Chemical Engineering in Universities of Shandong, College of Chemical Engineering, Qingdao University of Science and Technology, Qingdao 266042, China
  Center of Carbon Capture and Industrial Utilization, Jiangmen Laboratory of Carbon Science and Technology, Jiangmen 529020, China
  College of Health Science and Environmental Engineering, Shenzhen Technology University, Shenzhen 518118, China
- Author bio：
  
  Corresponding authors. E-mail addresses:wumanok@126.com(M. Wu),qingjie_guo@vip.sina.com(Q. Guo).
  * Corresponding authors. E-mail addresses:wumanok@126.com(M. Wu)
  * Corresponding authors. E-mail addresses:qingjie_guo@vip.sina.com(Q. Guo).
- Funds：
  
  the National Natural Science Foundation of China(22108143);the Shen-zhen Postdoctoral Research Funding Project(20241063010013)
- DOI：
  中图分类号：
- 收稿：2025-11-06，
  
  修回：2026-01-20，
  
  录用：2026-01-21，
  
  网络首发：2026-04-16，
  
  纸质出版：2026-07
- Accepted：
Scan QR Code
Sun Chengbin, Wang Meng, Zhan Dekang, 等. Characterization of dynamic behavior in the liquid spray zone of a bottom-spouted fluidized bed[J]. 中国化学工程学报（英文）, 2026,95(7):194-206.

Sun Chengbin, Wang Meng, Zhan Dekang, et al. Characterization of dynamic behavior in the liquid spray zone of a bottom-spouted fluidized bed[J]. Chinese Journal of Chemical Engineering, 2026, 95(7): 194-206.
Sun Chengbin, Wang Meng, Zhan Dekang, 等. Characterization of dynamic behavior in the liquid spray zone of a bottom-spouted fluidized bed[J]. 中国化学工程学报（英文）, 2026,95(7):194-206. DOI：

Sun Chengbin, Wang Meng, Zhan Dekang, et al. Characterization of dynamic behavior in the liquid spray zone of a bottom-spouted fluidized bed[J]. Chinese Journal of Chemical Engineering, 2026, 95(7): 194-206. DOI：

摘要

Abstract

The dynamic behavior and particle shape effects in the liquid spray zone were investigated through temperature standard deviation

liquid—solid contact efficiency

and electrical conductivity signals. Results indicate that temperature standard deviation increases with proximity to the nozzle. Elevated atomisation gas velocity (

) reduces droplet diameter and improves their dispersion

which leads to a more uniform temperature distribution and a resulting decrease in standard deviation. The temperature standard deviation is decreased and then increased with the increasing of fluidized gas velocity (

). Non-spherical particles had a higher temperature standard deviation than spherical particles. This resulted from particle agglomeration

where lower sphericity led to stronger fluctuations. The liquid—solid contact efficiency is enhanced with the increasing of spouted gas velocity (

)

and

all. As the liquid spouted rate (

) increased

the liquid—solid contact efficiency

determined by particle capture of droplets

first rose and then declined. Non-spherical particles exhibit higher liquid—solid contact efficiency than that of spherical particles due to longer residence times

and larger contact areas with droplets. Droplet fluctuations are intense near the nozzle

resulting in high electrical conductivity signal intensity. Increased

enhances airflow effects

causing frequent voltage signal fluctuations. Flake-like particles accumulate more droplets due to agglomeration

enabling droplets to reach higher bed positions. These studies provide promising research directions for the development of adsorbent pelletization in CO

capture.

关键词

Keywords

references

D.D. Hu, X. Zeng, F. Wang, Z.N. Han, F. Ding, J.R. Yue, G.W. Xu, Release behavior and generation kinetics of gas product during rice husk pyrolysis in a micro spouted bed reactor, Fuel 287 (2021) 119417.

J.M. Link, W. Godlieb, P. Tripp, N.G. Deen, S. Heinrich, J.A.M. Kuipers, M. Schönherr, M. Peglow, Comparison of fibre optical measurements and discrete element simulations for the study of granulation in a spout fluidized bed, Powder Technol. 1 89 (2) (2009) 202—217.

X.Y. Zhang, W.Q. Liu, S.M. Zhou, Z.X. Li, J. Sun, Y.C. Hu, Y.D. Yang, A review on granulation of CaO-based sorbent for carbon dioxide capture, Chem. Eng. J. 446 (2022) 136880.

W. Jittanit, G. Srzednicki, R.H. Driscoll, Comparison between fluidized bed and spouted bed drying for seeds, dry , Tech 31 (1) (2013) 52—56.

Y. Zhang, B.S. Jin, W.Q. Zhong, Experiment on particle mixing in flat-bottom spout—fluid bed, Chem. Eng. Process. Process Intensif. 48 (1) (2009) 126—134.

N. Spiegl, C. Berrueco, X.Y. Long, N. Paterson, M. Millan, Production of a fuel gas by fluidised bed coal gasification compatible with CO 2 capture, Fuel 259 (2020) 116242.

A. Erkiaga, G. Lopez, I. Barbarias, M. Artetxe, M. Amutio, J. Bilbao, M. Olazar, HDPE pyrolysis-steam reforming in a tandem spouted bed-fixed bed reactor for H 2 production, J. Anal. Appl. Pyrolysis 116 (2015) 34—41.

D.G. Boer, J. Langerak, P.P. Pescarmona, Zeolites as selective adsorbents for CO 2 separation, ACS Appl. Energy Mater. 6 (5) (2023) 2634—2656.

J. Harting, S. Frijters, M. Ramaioli, M. Robinson, D.E. Wolf, S. Luding, Recent advances in the simulation of particle-laden flows, Eur. Phys. J. Spec. Top. 223 (11) (2014) 2253—2267.

A. Leach, F. Portoghese, C. Briens, F. Berruti, A new and rapid method for the evaluation of the liquid—soli d contact resulting from liquid injection into a fluidized bed, Powder Technol. 184 (1) (2008) 44—51.

S.H. Tian, J.Y. Sun, Y. Yang, Y. Yang, Z.L. Huang, J.D. Wang, Y.R. Yang, Dynamic characteristics of the volatile cloudy zone in a gas—solid fluidized bed with hydrocarbon liquid spray, AIChE J. 67 (5) (2021) aic17155.

T.Q. Tang, Y.R. He, A.X. Ren, Y.H. Zhao, Investigation on wet particle flow behavior in a riser using LES-DEM coupling approach, Powder Technol. 304 (2016) 164—176.

J.Y. Sun, Z.L. Huang, D.F. Hu, Z.W. Liao, Y. Yang, J.D. Wang, Y.R. Yang, Dynamic and steady-state characterization of the liquid spray zone in an externally heated gas—solid fluidized bed, Ind. Eng. Chem. Res. 57 (8) (2018) 2988—3001.

M.J. Nobarzad, M. Tahmasebpoor, M. Imani, C. Pevida, S.Z. Heris, Improved CO 2 adsorption capacity and fluidization behavior of silica-coated amine-functionalized multi-walled carbon nanotubes, J. Environ. Chem. Eng. 9 (4) (2021) 105786.

R. Guo, J.H. Bai, F. Wu, J.W. Wang, X.X. Ma, Z.Q. Hui, CFD—DEM simulation of wet granular-fluid flows and heat transfer in an integral multi-jet spoutfluidized bed, Powder Technol. 403 (2022) 117384.

S.N. Zhao, F. Wu, X.X. Ma, W.J. Zhou, Effect of novel intensification structure on drying of particulate materials in spouted beds, J. Ind. Eng. Chem. 114 (2022) 263—275.

Z. Luo, Y.H. Yue, S. Wang, Y.S. Shen, CFD-DEM study of spout deflection behavior of co hesive particles in a spout fluidized bed, Powder Technol. 427 (2023) 118758.

X.J. Liu, J.Q. Gan, W.Q. Zhong, A.B. Yu, Particle shape effects on dynamic behaviors in a spouted bed: CFD-DEM study, Powder Technol. 361 (2020) 349—362.

A. Palamanit, S. Prachayawarakorn, P. Tungtrakul, S. Soponronnarit, Performance evaluation of top-spray fluidized bed coating for healthy coated rice production, Food Bioprocess Technol. 9 (8) (2016) 1317—1326.

P.K. House, C.L. Briens, F. Berruti, E. Chan, Effect of spray nozzle design on liquid—solid contact in fluidized beds, Powder Technol. 186 (1) (2008) 89—98.

Q. Shi, S.S. Li, S.H. Tian, Z.L. Huang, Y. Yang, Z.W. Liao, J.Y. Sun, J.D. Wang, Y.R. Yang, Investigating agglomeration behaviors in high temperature gas—solid fluidized beds with liquid injection, Ind. Eng. Chem. Res. 57 (15) (2018) 5482—5494.

S.Y. Pan, J.L. Ma, D.Y. Liu, X.P. Chen, C. Liang, Liquid transport in a gas—solid fluidized bed: Bed conductance analysis, Powder Technol. 408 (2022) 117749.

D.K. Zhan, Study on the characteristics of non-spherical particle spray zone in a spouted fluidized bed, Master Thesis, Qingdao University of Science and Technology, China,2024.

E.W.C. Lim, Mixing behaviors of dry and wet particles in a pulsating fluidized bed, Ind. Eng. Chem. Res. 62 (49) (2023) 21483—21497.

H. Li, D.Y. Liu, J.L. Ma, X.P. Chen, Sim ulation of a wurster fluidized bed by CFD—DEM with a cohesive contact model, Chem. Eng. Res. Des. 177 (2022) 157—166.

H.Y. Jin, Q. Wu, S. Wang, Y.R. He, Heat and mass transfer performance of non-spherical wet particles in a fluidized bed dryer, Appl. Therm. Eng. 236 (2024) 121780.

A. Esteghamatian, M. Bernard, M. Lance, A. Hammouti, A. Wachs, Micro/meso simulation of a fluidized bed in a homogeneous bubbling regime, Int. J. Multiph. Flow 92 (2017) 93—111.

Y.F. Zhou, H. Li, M.Y. Zhu, X.Y. Hu, H.Z. Yuan, S.Q. Jiang, L.C. Han, Effects of liquid content and surface tension on fluidization characteristics in a liquidcontaining gas—solid fluidized bed: A CFD—DEMstudy, Chem. Eng. Process. Process Intensif. 153 (2020) 107928.

A.X. Ren, T.Q. Tang, Y.R. He, Evolution of mesoscale structure in fluidized beds with non-spherical dry and wet particles, Adv. Powder Technol. 33 (11) (2022) 103794.

N. Yang, Y.L. Zhou, T.Y. Qi, Z.Y. Lu, Bitumen cracking using liquid injection, Petrol. Sci. Technol. 34 (13) (2016) 1164—1171.

Z.H. Yuan, Numerical simulation study of non-newtonian fluid—particle two-phase flow in liquid—solid fluidized beds, Ph.D. Thesis, Northeast Petroleum University, China, 2023.

N. Yang, Y.L. Zhou, S.S. Ma, Improved nozzle structure and study on particle aggregation in liquid spouted processes, Acta Chem. Sinica 70 (2019) 169—180. (in Chinese)

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

CFD investigation in the temperature effect on coal catalytic hydrogasification in the pressurized bubbling fluidized bed

Preparation of MoO3/γ-Al2O3 sulfur-resistant methanation catalyst with segmented plasma fluidized bed

Experimental analysis of internal flow and spray characteristics of flow focusing/blurring nozzle

Influences of polymorphism of packed particles on bulk characterizations in fluidization realm

Hydrodynamic analysis of carbon nanotube clusters in distributor-less conical fluidized beds with step-by-step scaling